Hes got a 12'x7'mold and a longer and wider 14'x7'9" mold. He has a plug he puts in the 14' mold in order to make 13' hulls. Both molds are his same desighn with his tricks.

Edit : just loaded a pic under the picture gallery of the bottom of one of his 13s

Yes even a 12' ricochet will have much more bottom then a gore but i still dont think its enough for what you want to do. Also the 12' mold is 7'1" wide at the top with a 15" deep transom. The larger mold used for the 13 and 14 is 7'9" at the top and 17.5" deep at the transom. Like i said i went wit...

Yes even a 12' ricochet will have much more bottom then a gore but i still dont think its enough for what you want to do. Also the 12' mold is 7'1" wide at the top with a 15" deep transom. The larger mold used for the 13 and 14 is 7'9" at the top and 17.5" deep at the transom. Like i said i went wit...

You would be making a huge mistake trying to put a carmotor gearbox setup inside any 12' hull let alone a Gore with barely any running bottom. I was gonna go with a 13' Ricochet but honestly feel the 25lb heavier 14' will be faster with less torque role for my setup.

They buck like a mofo if you want a good flatbottom , the predator superfasts are badass same with jimmy whites squarenose I tried a predator superfazt and it is not a good carmotor hull. I lost alot of money buying that hull and selling it shortly after. Very dissapointed in you Bruce. Have you ev...

I should be picking up my new 14 footer by the end of next week. Its getting a 418ci EFI LS, still got a rigging and everything else to do so hope to have it on the water by mid June. Im pretty damn excited.

R.I.P John, he always called it like it was

I honestly feel the 69" narrow whispertip prop is the best all around 4cyl prop made. Im still not a huge fan of the heavy hub but the prop flat out works. I was amazed to see a 0-320 lycoming hit 71.2mph on a flat bottom glass boat thursday night at the oakhead. That was with Helms Garmin that was ...

I honestly feel the 69" narrow whispertip prop is the best all around 4cyl prop made. Im still not a huge fan of the heavy hub but the prop flat out works. I was amazed to see a 0-320 lycoming hit 71.2mph on a flat bottom glass boat thursday night at the oakhead. That was with Helms Garmin that was ...

Nothin but crickets!

Sweeeet! Will be there

Not sure why that posted three times. But thats good, Bill is a good dude!

Bill is the name of the guy helping with the water thunder. The other guy is Ray, he seems to have some bad luck with that boat. Hope they got it home, glad everyone was ok.

Im with Spud on this.

Im with Spud on this.

SJRAA posted on FB that they will be cooking tomorrow. Everyone be safe, its gonna be a good one.

What to look for, a supercharger on front of engine.

What to do, run away as fast as you can unless you have alot of money to blow and time to waste.

Id rather have a slow 180 200 470 520 or 540 jmo if you want to go fast just add nitrous or build a stroker LS

No hats, no classes, just pick who you want and line them up.

Thats less of a weight diiference then i thought it was to be honest. And let me guess James you gained 500Rpms by switching to a ballistic? Lol

When they are brought down to the same weight as my rotator i will buy one

WOW!!!! Huge congrats

Yes i do. I think you will be wasting a good motor in a very short amount of time.

Dave had the best luck with a bowtie 4 blade 72" saber on his 427 ci stroker LS DD. IMO You would be wasting your time and money building that LS dd. Save up some money for a used gear box and build yourself a real boat. There is a 2:1 stinger in classifieds for 1800. Then you could probably find a ...

^^^^Not for direct drive. Good luck keeping that motor together without a thrust bearing.

Double post