Sensenich Props--Including New J Series

shiggs
Site Supporter - III
Site Supporter - III
Posts: 796
Joined: Wed Dec 13, 2006 7:20 pm
Location: Texas Coast

Sensenich Props--Including New J Series

Post by shiggs »

If any of you guys ever want a Sensenich Prop, I will try to pass on some savings.

Send me a PM on what props you want a price on and I will get back to you

Steve


NGR Swept--Custom Anodized Hub and Red Tips for 21DiamondB.

Image

Image

"H" Blade Narrow Both short and long(LHR-RHR) for A/C and Auto

Image

Picture of Q-R-S

Image

"Q" Blade Medium swept--LHR only

Image

"R" Blade Wide Swept-LHR-RHR

Image

"S" Blade Superwide Swept-LHR-RHR

Image
Last edited by shiggs on Fri Dec 02, 2016 11:20 pm, edited 2 times in total.

Kpeterson
Southern Airboat Member
Posts: 147
Joined: Sat Nov 07, 2009 10:32 pm
Location: Fort Myers Florida

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by Kpeterson »

How much do those warp drive saber blades run?

shiggs
Site Supporter - III
Site Supporter - III
Posts: 796
Joined: Wed Dec 13, 2006 7:20 pm
Location: Texas Coast

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by shiggs »

Sent you a PM

CULTURED REDNECK
Site Supporter - II
Site Supporter - II
Posts: 380
Joined: Tue Dec 18, 2007 11:23 am
Location: Houston, TX
Contact:

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by CULTURED REDNECK »

I've got a 0-360 with a 68"x34" wood prop on an old 11'-6 glass hull. I would like to have a 3-blade carbon fiber prop, but cant justify spending almost as much for a new prop as I paid for the whole boat.. Would there be a noticeable difference in performance with a 3-blade carbon fiber prop VS my old wood prop??

shiggs
Site Supporter - III
Site Supporter - III
Posts: 796
Joined: Wed Dec 13, 2006 7:20 pm
Location: Texas Coast

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by shiggs »

I can only speak from my testing, and not knowing how your boat runs now with the current prop it would only be a guess.

My first boat had a Franklin 6-cyl with a modified cam pushing about 220-240 hp we guess. I had a 72-34 wood prop if I remember right, and when it cracked on the hub I made the jump to a 72" 3-blade H. I noticed a considerable difference, as I was able to tune it (not an option on the fixed blade) to get the most out of the motor.

You probably would see some difference, but how noticeable it would be depends on how good your prop works with your engine now. :?:

I know that this does not definitively answer your question, but I am being honest with you from what I have experienced. Like some of the knowledgeable folks have said--every combo is different and people's preferences are different. :D

aktim
Southern Airboat Member
Posts: 36
Joined: Tue May 19, 2009 11:57 am
Location: Alaska

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by aktim »

Wondering how much a three blade R in 78" -80" would be left hand rotaion

shiggs
Site Supporter - III
Site Supporter - III
Posts: 796
Joined: Wed Dec 13, 2006 7:20 pm
Location: Texas Coast

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by shiggs »

PM sent.

TwistedAmbition
Site Supporter - I
Site Supporter - I
Posts: 86
Joined: Mon Feb 01, 2010 8:50 pm
Location: Clermont, FL

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by TwistedAmbition »

How much for the 68LML-36K 0320 150 HP Wood prop?
12' x 7' JB Hull - IO360 - 70" NGH

shiggs
Site Supporter - III
Site Supporter - III
Posts: 796
Joined: Wed Dec 13, 2006 7:20 pm
Location: Texas Coast

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by shiggs »

I will check tomorrow.

Send me your email address to steve@deepsouthcoastal.com

User avatar
theduckslayer004
Southern Airboat Member
Posts: 50
Joined: Tue Mar 09, 2010 9:13 pm
Location: Trinity, Texas

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by theduckslayer004 »

He really can save you some money. He got me a 2 blade r series 80" and it only took a few weeks to get it. Thanks again Steve

JimmyC
Southern Airboat Member
Posts: 25
Joined: Fri Sep 10, 2010 12:42 pm

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by JimmyC »

Ok , i'll bite , I've got a 4 cyl. 150 hp. on a 10 ft. deckover ,72 in. warpdrive . I like the 3 blade "h" series, how much?

shiggs
Site Supporter - III
Site Supporter - III
Posts: 796
Joined: Wed Dec 13, 2006 7:20 pm
Location: Texas Coast

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by shiggs »

JimmyC wrote:Ok , i'll bite , I've got a 4 cyl. 150 hp. on a 10 ft. deckover ,72 in. warpdrive . I like the 3 blade "h" series, how much?
Sent you a PM.

I just now realized I concentrated more on what you said you liked, than what you said you had. I think a 3-blade might be too much for your 150hp. How many blades are you running on your warp?? I am guessing around 4 at 72". I ran a 3-blade 72" H on a 6 cyl aircraft motor for awhile. I was thinking mine was somewhere around 240-250 hp.

myronja
Southern Airboat Member
Posts: 568
Joined: Tue Apr 22, 2008 1:21 pm
Location: Mont Belvieu,tx

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by myronja »

hey shiggs, jimmyc warp drive is a 4 blade if i'm not mistaken i think he said he was turning 2750 or somewhere right around there.
TAA-436
15' panther 350dd 72"x30 Flordia Paddle 40mph-sold
16X7 Air Ranger 383 stroker 2:1 belt 78" powershift 3/8" poly 58.8mph had to let out

User avatar
Cowley
Site Supporter - VIII
Site Supporter - VIII
Posts: 149
Joined: Wed May 26, 2010 9:17 pm
Location: Wichita, Kansas

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by Cowley »

Shiggs, sent you a PM.
18x8 Alumitech / 8.1l Levitator / Century 2.3:1 / 82" Sensenich 4 blade R

80 panther
Southern Airboat Member
Posts: 233
Joined: Tue Mar 09, 2010 11:19 am
Location: Aransas Pass tx

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by 80 panther »

For those of you out there that want a prop but not sure if you want to deal with steve higgs. He gave me a good deal on the new NGH 3 blade with no problems ! He even sent me a $20 check because the shipping was less than he thought.you don't find many honest people like him. he is a stand up guy!!!!

texasstyle
Southern Airboat Member
Posts: 21
Joined: Mon Mar 21, 2011 9:29 am

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by texasstyle »

How bout a 72" Q??? :scratch:

shiggs
Site Supporter - III
Site Supporter - III
Posts: 796
Joined: Wed Dec 13, 2006 7:20 pm
Location: Texas Coast

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by shiggs »

Sent you a PM

User avatar
Lonewolf9029
Site Supporter - V
Site Supporter - V
Posts: 826
Joined: Thu Aug 21, 2008 7:01 pm
Location: Houston,Tx.

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by Lonewolf9029 »

I second that on Steve being a standup guy. He sold me my 3 bld 80" "R" series and hub. Was even brave enough to give the boat its maiden run after I built it :cheers: . Thanks Again Steve
TAA-426 15' x 7' Panther>>>350>>>2.68 Rotator gearbox>>.Sensenich 3bld 80" "R" series

Dglover
Southern Airboat Member
Posts: 145
Joined: Thu Sep 24, 2009 12:02 am

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by Dglover »

:usa: :usa: Can I get a price for a 72 inch 5 blade sabor and also a price on the blades only. Did sensenich fix the issue they where having with the blocks holding the blades or should i run a warp drive hub ? Thanks for the help Steve :salute:

shiggs
Site Supporter - III
Site Supporter - III
Posts: 796
Joined: Wed Dec 13, 2006 7:20 pm
Location: Texas Coast

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by shiggs »

Sorry I haven't checked this thread in a long time

Best to get me by email or PM.

Sending you a PM with Price.

Beef
Southern Airboat Member
Posts: 73
Joined: Mon Feb 01, 2010 9:23 pm
Location: DeLand, FL

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by Beef »

Send me a price on nine saber blades rhr for gear box

shiggs
Site Supporter - III
Site Supporter - III
Posts: 796
Joined: Wed Dec 13, 2006 7:20 pm
Location: Texas Coast

Re: Deal on Sensenich Props--Including New "SABER" Blades

Post by shiggs »

Beef wrote:Send me a price on nine saber blades rhr for gear box
PM sent.

shiggs
Site Supporter - III
Site Supporter - III
Posts: 796
Joined: Wed Dec 13, 2006 7:20 pm
Location: Texas Coast

Sensenich Props--Including New J Series

Post by shiggs »

New J Series props now available. Prices are better comparing to the same config of the older styles.

User avatar
JAMES
Site Supporter - II
Site Supporter - II
Posts: 8569
Joined: Wed Aug 22, 2007 10:31 pm
Location: cocoa
Contact:

Re: Sensenich Props--Including New J Series

Post by JAMES »

Price on Q rhr 3 bld 80"
https://m.facebook.com/321ccc/?ref=bookmarks Wp383 268 rotator 3 bld WT/EX 14.4 perdator

shiggs
Site Supporter - III
Site Supporter - III
Posts: 796
Joined: Wed Dec 13, 2006 7:20 pm
Location: Texas Coast

Re: Sensenich Props--Including New J Series

Post by shiggs »

JAMES wrote:Price on Q rhr 3 bld 80"
James,

I don't have Q in right hand rotation nor that diameter. The Q application was for aircraft engines and thus LHR and smaller diameters. I think when they designed the NGQ they offered it in both left and right. Let me know if that was just a typo and you meant something else.

sh

Post Reply

Return to “Texas Club Talk”