Who builds rigging around Sebring?

User avatar
atvracer16
Southern Airboat Member
Posts: 248
Joined: Sun Mar 18, 2012 3:40 pm

Who builds rigging around Sebring?

Postby atvracer16 » Sun Mar 23, 2014 6:12 pm

About to start a boat build and need someone to build my rigging for me. Who does it for a decent price? I just want DOM, no stainless.
13' Aluminum w/ SBC 350 (440hp), 2.38 Stinger Soft Drive, & 2 Blade 76" R Series

polk0020
Southern Airboat Member
Posts: 37
Joined: Tue Jul 13, 2010 8:14 pm

Re: Who builds rigging around Sebring?

Postby polk0020 » Mon Jun 16, 2014 12:51 pm

What kind of price you looking at? Itll be hard to find someone to do it for less than 1500. What kind of motor are you running an are you wanting the seats low or high for hunting? We usually build riggng kut of emt but the motor stand would be steel

User avatar
kwanjangnihm
Site Supporter - IV
Site Supporter - IV
Posts: 1917
Joined: Sat Mar 30, 2013 8:23 pm
Location: Bartow FL

Re: Who builds rigging around Sebring?

Postby kwanjangnihm » Mon Jun 16, 2014 1:17 pm

earlier thread for rigging in your area!

viewtopic.php?f=85&t=60119&hilit=lake+placid

:rebel:
" I don't care who you are back in the world, you give away our position one more time, I'll bleed ya, real quiet. Leave ya here. Got that? "

User avatar
jaxduramax
Southern Airboat Member
Posts: 53
Joined: Wed Mar 19, 2014 2:36 pm
Location: Jacksonville, NC

Re: Who builds rigging around Sebring?

Postby jaxduramax » Mon Jun 16, 2014 2:19 pm

Atvtracer16, didn't you post a reply with a reference, name and phone number in the above mentioned thread? Is that guy not around any more? I'm moving back to Wauchula in 2 months so I'm going to need rigging close to that area as well.

GOTTHEITCH22
Southern Airboat Member
Posts: 6
Joined: Wed May 28, 2014 2:30 pm

Re: Who builds rigging around Sebring?

Postby GOTTHEITCH22 » Thu Jun 26, 2014 8:24 am

Dakota airboats

User avatar
scottyroll
Site Supporter - I
Site Supporter - I
Posts: 885
Joined: Tue Mar 10, 2009 8:19 pm
Location: JAX/Ocala
Contact:

Re: Who builds rigging around Sebring?

Postby scottyroll » Thu Jun 26, 2014 8:31 am

GOTTHEITCH22 wrote:Dakota airboats


Chris does great work at a fair price; he is in Melbourne though. And depending on what you want done, I don't think there is much of a price difference between the two metals - and when factoring longevity your better off spending the lil bit extra for stainless IMO
:Scotty-Roll:
FLAwless

1999 14ft Alumitech deckover. ZZ502. 2.37 Stinger. 4 blade WW Falcon Prop


Return to “Florida Airboaters”

Who is online

Users browsing this forum: No registered users and 24 guests