Page 1 of 1

Perfect prop for lyconental

Posted: Wed Jun 20, 2012 2:13 pm
by Southernoutlaw
I am building a 11'6" aluminum step hull one seater with a lyconental and im probably going with a ngh or q because I want it to have good push as well as response but I would like some opions on which prop I should use

Perfect prop for lyconental

Posted: Wed Jun 20, 2012 2:15 pm
by DannySauls
Tell us a little more about the motor? What diameter would you prefer if there are any limitations

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 2:26 pm
by Southernoutlaw
The motors apart now and I havent run it yet but nothing larger than a 72" prop

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 2:32 pm
by aherr520
if you can get at least 200HP out of that motor I would go with the NGH it will give you what your looking for

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 2:34 pm
by Southernoutlaw
Thanks thats what I was leaning twards

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 2:41 pm
by Southernoutlaw
Should I get a two or three blade ngh

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 2:49 pm
by aherr520
two blade,70'' or 72'' great all around performance or you can go with a 5 blade saber depending on how HP you will have,I am going to build a 4 banger with turbo and might go with the saber

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 2:54 pm
by Southernoutlaw
Its going to have alot of hp so ill go with the 72 ngh thanks guys

Perfect prop for lyconental

Posted: Wed Jun 20, 2012 3:09 pm
by DannySauls
If you ever want to try a whirlwind the narrow blade in either a 70" or 72" 2 blade would be pretty wicked or if your feeling frisky the razors a sharp performing propeller with some serious snap and top end!

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 3:52 pm
by Tony480
Is it a 6 cylinder or 4?

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 4:04 pm
by Southernoutlaw
6 cylinder

Perfect prop for lyconental

Posted: Wed Jun 20, 2012 4:12 pm
by DannySauls
What kinda power is a lot of power?

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 4:14 pm
by Tony480
6 blade saber. I hope it's stronger then the few I have seen.The couple I seen were turds.

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 4:19 pm
by Qwikdiesel
IMO, If your wanting to race it 72" is to long.

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 4:45 pm
by Southernoutlaw
Its going to be a ride and race boat boat

Re: Perfect prop for lyconental

Posted: Wed Jun 20, 2012 6:14 pm
by cont520
Must be some top secret classified stuff noones ever tried before. Hell I would go with a 70" 6 blade saber or razor prop plenty of low end and runs out well