faded sesnich prop

Airboat propeller discussion.
Post Reply
bullydoginit
Southern Airboat Member
Posts: 20
Joined: Sun Oct 13, 2013 3:42 pm

faded sesnich prop

Post by bullydoginit » Sat Nov 29, 2014 1:45 pm

What do i do new to these props do u paint them is it bad for them there real faded

propman
Site Supporter - II
Site Supporter - II
Posts: 27
Joined: Sun Dec 19, 2010 9:38 am

Re: faded sesnich prop

Post by propman » Wed Dec 03, 2014 8:36 am

DO not ever paint a wooden prop!!!!!!!! PROPMAN

fl cracker
Site Supporter - II
Site Supporter - II
Posts: 4030
Joined: Thu Aug 20, 2009 9:15 pm
Location: Sorrento,FL

Re: faded sesnich prop

Post by fl cracker » Wed Dec 03, 2014 4:25 pm

You can send the Blades in for Dura Skin, they will shine like new! I wax the sheet out of mine, seems to work good!
" I have two guns...
One for each of you "

2017 Hamant / SV540

User avatar
a1mudpuppy
Site Supporter - VI
Site Supporter - VI
Posts: 731
Joined: Wed Oct 20, 2004 9:43 pm
Location: Brooksville

Re: faded sesnich prop

Post by a1mudpuppy » Thu Dec 25, 2014 9:10 pm

Has anyone had a issue with the dura skin fading because mine have. I called and they said to use rubbing compound then wax them but it doesn't work. It's a shame I paid all that money to have the dura skinned and it's right back to what they looked like before
It's easier to ask for forgiveness
that it is for permission!

IN THE BEGINING
Image

User avatar
ptr34
Site Supporter - II
Site Supporter - II
Posts: 2836
Joined: Wed Oct 04, 2006 5:29 pm
Location: plant city

Re: faded sesnich prop

Post by ptr34 » Thu Dec 25, 2014 11:25 pm

What u clean them with? Polish and a buffer shines right up
if u don't run dry .then should have gotten a bassboat
tons videos on YouTube ptr34

User avatar
farmboy
Site Supporter - VIII
Site Supporter - VIII
Posts: 2588
Joined: Sun Dec 11, 2011 3:20 pm
Location: Belle Glade . FL

Re: faded sesnich prop

Post by farmboy » Fri Dec 26, 2014 7:54 am

I've got a ton of hours on my Dura-Skin blades and mine still look brand new. I believe they where done about 2 years ago and I ride a couple times a week....
14ft JB Hull,Lycoming GSO480 w/water-meth injection,Sensenich 3-blade "R",ButtRaxx seats,B&S Trailer.

Member of Glades Airboat & Buggy Association / Kissimmee River Valley Sportsman Association

signcoc43
Southern Airboat Member
Posts: 350
Joined: Mon Dec 14, 2009 7:44 pm
Location: keystone heights fl

Re: faded sesnich prop

Post by signcoc43 » Fri Dec 26, 2014 9:03 am

I just keep mine washed with soap and use the turtle wax ice detailer spray
12 foot hamant fuel injected pe-90 520 conversion swinging a 68" ngq!!
" Yes my boat is slow!!!"

User avatar
a1mudpuppy
Site Supporter - VI
Site Supporter - VI
Posts: 731
Joined: Wed Oct 20, 2004 9:43 pm
Location: Brooksville

Re: faded sesnich prop

Post by a1mudpuppy » Fri Dec 26, 2014 11:29 am

Hey Terry
Been washing them with a car wash style soap and waxing them with meguiar's wax. I put a photo of one of the props but I forgot how to post it to the form. It looks like the dura skin is come off. There are lines on it to like its cracking. I have about 100 hours on them.

Image
Last edited by a1mudpuppy on Fri Dec 26, 2014 11:46 am, edited 2 times in total.
It's easier to ask for forgiveness
that it is for permission!

IN THE BEGINING
Image

User avatar
kwanjangnihm
Site Supporter - IV
Site Supporter - IV
Posts: 1926
Joined: Sat Mar 30, 2013 8:23 pm
Location: Bartow FL

Re: faded sesnich prop

Post by kwanjangnihm » Fri Dec 26, 2014 11:45 am

a1mudpuppy here's your photo!

Image
" I don't care who you are back in the world, you give away our position one more time, I'll bleed ya, real quiet. Leave ya here. Got that? "

User avatar
a1mudpuppy
Site Supporter - VI
Site Supporter - VI
Posts: 731
Joined: Wed Oct 20, 2004 9:43 pm
Location: Brooksville

Re: faded sesnich prop

Post by a1mudpuppy » Fri Dec 26, 2014 11:48 am

Thanks kwanjangnihm
It's easier to ask for forgiveness
that it is for permission!

IN THE BEGINING
Image

User avatar
ptr34
Site Supporter - II
Site Supporter - II
Posts: 2836
Joined: Wed Oct 04, 2006 5:29 pm
Location: plant city

Re: faded sesnich prop

Post by ptr34 » Fri Dec 26, 2014 5:06 pm

Try a buffer and rubbing compound
if u don't run dry .then should have gotten a bassboat
tons videos on YouTube ptr34

User avatar
a1mudpuppy
Site Supporter - VI
Site Supporter - VI
Posts: 731
Joined: Wed Oct 20, 2004 9:43 pm
Location: Brooksville

Re: faded sesnich prop

Post by a1mudpuppy » Fri Dec 26, 2014 9:16 pm

I have been buffing with compound. The issue I'm having now is that the dura skin looks like it's coming off. really didn't look closely at the props when they were on the AB but now I can inspect them closer as they are sitting on my table.
It's easier to ask for forgiveness
that it is for permission!

IN THE BEGINING
Image

User avatar
HuntingBigun
Site Supporter - VIII
Site Supporter - VIII
Posts: 6272
Joined: Mon Jan 07, 2008 11:39 pm
Location: Plant City, FL
Contact:

Re: faded sesnich prop

Post by HuntingBigun » Fri Dec 26, 2014 11:06 pm

Call Darrin at Sensenich good to see ya posting again mine on Venom were 3 years old looked great small erosion on wingless but part game with deck over chopping water sometimes
Bigun

http://www.krvsa.com

http://krvsa.com/product/airboat-raffle-tickets/


Click for pics = http://www.flickr.com/photos/huntingbigun/

Killin Time 15.6 Diamondback Deckover Mast 808 Hp SC LS 7 /KRVSA /NRA

User avatar
pontoon outlaw
Site Supporter - IV
Site Supporter - IV
Posts: 1666
Joined: Fri Dec 04, 2009 7:56 pm
Location: palm bay, ride in Cocoa

Re: faded sesnich prop

Post by pontoon outlaw » Sat Dec 27, 2014 7:46 am

:violent1: JMO is a faded prop really an issue :scratch: I have a whirlwind that's faded over time 12 years and counting and works like a charm, it's like worrying about your polymer being scratched :lol:

User avatar
a1mudpuppy
Site Supporter - VI
Site Supporter - VI
Posts: 731
Joined: Wed Oct 20, 2004 9:43 pm
Location: Brooksville

Re: faded sesnich prop

Post by a1mudpuppy » Fri Aug 07, 2015 4:35 pm

I want my prop to look as good as my airboat does. I would care so much if my AB look like a POS but I spent the money to make them look like new and they didn't last like I was told.

I took them back and Darren said he has never seen blades white like mine so he is going to redo the...any yes it's going to cost me again. The thing that pisses me off the most is I was to get them back 2 weeks ago. The still have them and the said sometime next week. GD you can make 4 sets of them in 4 weeks
It's easier to ask for forgiveness
that it is for permission!

IN THE BEGINING
Image

User avatar
riverrat1
Southern Airboat Member
Posts: 260
Joined: Sun Oct 06, 2013 5:44 pm

Re: faded sesnich prop

Post by riverrat1 » Fri Aug 07, 2015 4:47 pm

Go get the rubber molding restore it works good.

User avatar
a1mudpuppy
Site Supporter - VI
Site Supporter - VI
Posts: 731
Joined: Wed Oct 20, 2004 9:43 pm
Location: Brooksville

Re: faded sesnich prop

Post by a1mudpuppy » Fri Aug 07, 2015 4:49 pm

I have been doing that

Works great if you want to do it every other time you take the AB out
It's easier to ask for forgiveness
that it is for permission!

IN THE BEGINING
Image

Post Reply

Return to “Prop Talk”