motor mods

Longest running airboat discussion on the internet.
Post Reply
DAVE
Southern Airboat Member
Posts: 50
Joined: Mon Dec 13, 2004 9:51 pm
Location: Bradenton, FL

motor mods

Post by DAVE »

hello all i have few questions about what is good for a 400sbc with a rotator and a 2 blade terminator what cam and carb are best suited the boat is a 14' alumitech ultralight
Top
User avatar
Waterthunder
Site Supporter - VIII
Site Supporter - VIII
Posts: 8166
Joined: Fri Jan 21, 2005 3:16 pm
Location: Melbourne
Contact:
Contact Waterthunder

Post by Waterthunder »

What ratio box and I need about 15 other details before I can recomend a cam. What comp is the motor, what heads, intake, dia prop and what do you want your boat to do best.
THE PROOF IS IN THE PROP!

"If you copy someone you will only achieve what has already been done."

http://waterthunder.com/
321-508-5316
Top
DAVE
Southern Airboat Member
Posts: 50
Joined: Mon Dec 13, 2004 9:51 pm
Location: Bradenton, FL

Post by DAVE »

it is a low comp motor stock heads and a edelbrock performer intake wit a 2.12:1 rotator with a 78" terminator and it will not run dry very well
Top
cntry141iq
Site Supporter - VI
Site Supporter - VI
Posts: 10136
Joined: Fri Sep 03, 2004 9:31 pm
Location: bradenton florida
Contact:
Contact cntry141iq

Post by cntry141iq »

get the right cam for it and she should run dry no problem even a a dd add a gearbox and the right prop and hangon.
Don't waste your time ... it is the only thing you can't get more of
.. if it accidentally looks like I gave advice please ignore it .. and notify me immediately
Top
Post Reply

Return to “Airboat Talk”