Longest running airboat discussion on the internet.
- Site Supporter - VI
- Posts: 1690
- Joined: Sun Aug 21, 2005 11:08 am
- Location: Sarasota Fl.
From another thread Whitebear wrote:
I may be buillding a chain reduction drive for the 4 cylinder aircraft motors as well.
You've got my attention, I'm interested. I've got two boats
with 0-320 Lycomings. One is strong and the other I'm building up with rebuilt cyl's and carb from Jurnigan's. Just waiting on my mags to get back. But with a good drive to turn more prop, that'd be the ticket!
Keep me posted.
- Site Supporter - VIII
- Posts: 16555
- Joined: Thu Jan 05, 2006 7:49 pm
- Location: Palm Bay, Fl
I just posted a little in Airboat Projects thread on this and other stuff I'm actively working on.
"The Constitution is not so the government can restrain the people, it is so the people can restrain the government." Patrick Henry
The government cannot give anything --
that they have not first taken from someone else.
- Site Supporter - VIII
- Posts: 6693
- Joined: Fri Dec 24, 2004 5:59 am
- Location: One One - Two Two Boogie Woogie Avenue
Use your gearbox to multiply your torque is the deal. Not just for automotive engines either. It flat works, and works well.
Just as Waterthunder has been saying for a long long time. It really is as simple as that when done right. You'll find yourself swinging more prop, not necessarily more RPMs. The same benefits will come that an automotive airboater gets with a deeper reduction also. Less fuel burned, better max push, super cruise economy, less sound, and probably less overall wear and tear on your engine.
They have an adapter out for a rotator to gpu cases, but I'm not sure how far along they are with the Continental and Lycoming A/C engine adaptors. Those are in the works, but I don't know how long it will be.
There seems to be plenty of auto engine airboaters out there who are deciding to go to an even deeper reduction in order to swing bigger props slower. It works, and they are gonna be glad they did. Heck, with gas prices as they are, the upgrades may pay for themselves in short order depending on how much running they do.
Of course there are some newer slow turning props out now that are designed to work well at the reduced propeller rpm's, and that's helping to spur interest in the deeper ratios.
Same as many auto guy's, aircraft engine airboaters are scared that they will be screaming way to many RPM's. If you get it geared down, and swing the right prop, you'll probably never run it that hard anyway. You'll just get way, way more push.
It will take some time for folks to figure out which prop works best behind the aircooled reducted engines. I'm not sure that the ones running right now even have enough prop on them, but they will figure it out pdq. It won't take decades anyway.
Time and money is all it takes. One of these days I'll have more of each.
When I do, I'll get myself a reducted aircooled set up.
Perhaps it will be a chain drive Scotty!