Big Thanks To Hamant Airboats!!!

Longest running airboat discussion on the internet.
Post Reply
User avatar
Blownaway
Southern Airboat Member
Posts: 87
Joined: Thu Nov 06, 2008 8:13 am
Location: Titusville, Fl

Big Thanks To Hamant Airboats!!!

Post by Blownaway » Thu Jan 19, 2012 11:02 pm

I would like to say thanks to Wade and all the guy at Hamant for the great job installing my new poly. My boat has never driven so nice. It had such a warped bottom since it was built that the poly was worn out in just 30 hrs of running. It had so many bubbles in it that I had to put a trim tab on it to keep my teeth in my mouth. I was told all boats do that. Well after the boys put that new sheet of poly on the right way I took it out today and it drove like a dream. Never crow hopped or porpoised once. Too bad I didn't buy that trim tab at Walmart I'd take it off and return it. :lol: Thanks again guys for the hard work and a fair price.
13ft DiamondBack, GTO/MAS 383 Stroker, 2.68:1 Rotator, 8 Blade Saber, Just Havin' Fun!

User avatar
Whitebear
Site Supporter - VIII
Site Supporter - VIII
Posts: 16554
Joined: Thu Jan 05, 2006 7:49 pm
Location: Palm Bay, Fl
Contact:

Re: Big Thanks To Hamant Airboats!!!

Post by Whitebear » Thu Jan 19, 2012 11:11 pm

They been at it a LOT of years and flat know their stuff. Great folks !

Certainly not dissing anyone else at all, but Wade is known for his high quality work. Just take a look at ANY boat he has built.
"The Constitution is not so the government can restrain the people, it is so the people can restrain the government." Patrick Henry
The government cannot give anything --
that they have not first taken from someone else.

User avatar
John C
Site Supporter - V
Site Supporter - V
Posts: 2884
Joined: Thu Jan 26, 2006 9:43 pm
Location: Palm City

Re: Big Thanks To Hamant Airboats!!!

Post by John C » Thu Jan 19, 2012 11:20 pm

:thumbup: :thumbup: :thumbup: Wade and crew know how to get it right. Glad to hear your boat is running like a dream.

User avatar
Southern Style
Site Supporter - IV
Site Supporter - IV
Posts: 5239
Joined: Mon Oct 06, 2008 3:34 pm
Location: Sarno marsh

Re: Big Thanks To Hamant Airboats!!!

Post by Southern Style » Fri Jan 20, 2012 8:34 am

Wade and the crew will definately fix you right up and don't make it a habbit of breaking the bank either... Great crew, customer service, and prices...........

They are my ONE STOP SHOP............
DONT ARGUE WITH STUPIDITY...THEY WILL JUST DRAG YOU DOWN TO THEIR LEVEL, AND BEAT YOU WITH EXPERIENCE.....
KRVSA Member
SJRAA Member
KCCO

User avatar
aherr520
Site Supporter - III
Site Supporter - III
Posts: 1096
Joined: Thu Jun 26, 2008 9:42 pm
Location: Paisley

Re: Big Thanks To Hamant Airboats!!!

Post by aherr520 » Fri Jan 20, 2012 11:24 pm

glad you got it fixed I didn't know you had a problem with it,I hope mine doesn't do that,did you fix your oil leak?
aaof member

User avatar
Waterthunder
Site Supporter - VIII
Site Supporter - VIII
Posts: 8166
Joined: Fri Jan 21, 2005 3:16 pm
Location: Melbourne
Contact:

Re: Big Thanks To Hamant Airboats!!!

Post by Waterthunder » Sat Jan 21, 2012 9:33 am

Their not a corporate giant but they do the best work. I'm getting ready to have them build me a new boat cant wait to see what new ideas he is gonna come up with for the new boat.
THE PROOF IS IN THE PROP!

"If you copy someone you will only achieve what has already been done."

http://waterthunder.com/
321-508-5316

User avatar
DynaMarine
Site Supporter - VIII
Site Supporter - VIII
Posts: 1516
Joined: Sat Oct 02, 2010 8:20 pm
Location: Lawrence, KS
Contact:

Re: Big Thanks To Hamant Airboats!!!

Post by DynaMarine » Tue Feb 14, 2012 11:29 am

X2 for Wade and crew. We needed to have some steering parts fabbed up and were a long way from home. Wade hooked us up on short notice and couldn't have been happier with the craftsmanship!

R,
Shane


Last bumped by Blownaway on Tue Feb 14, 2012 11:29 am.
Shane Lavalette
President/Owner

DynaMarine Performance Boats
785.218.9449
www.dyna-marine.com
shane@dyna-marine.com

Post Reply

Return to “Airboat Talk”