Killin Time is on the jig, birth of DB 15.6 CR Deckover

CWAIS · Post by **CWAIS** » Sat Feb 14, 2015 8:48 am

Huntingbigun
Wow what a build!!! Just awesome

shiggs · Post by **shiggs** » Sat Feb 14, 2015 10:46 am

Lookin' good Wayne!

HuntingBigun · Post by **HuntingBigun** » Sat Feb 14, 2015 12:23 pm

Thanks everyone, boat is really coming along nice, should be running it this next week if all goes as planned. Lot of things on the boat are really functional as well looking nice. Diamondback, Senenich, Mast Motorsports and all the vendors get the credit for a great build

HuntingBigun · Post by **HuntingBigun** » Sat Feb 14, 2015 2:31 pm

Guys sent me a Valentine present pick of the motor with new valve covers that cover up fuel injectors, cool burp tap above the belt drive, also the ecu and fuse panel for the engine is mounted under the motor in sweet box. The cage is just too cool as well plus them Saber blades not half bad

PAINKILLER · Post by **PAINKILLER** » Sat Feb 14, 2015 2:57 pm

Got a ? Wayne why paint the deck red and just cover it up

HuntingBigun · Post by **HuntingBigun** » Sat Feb 14, 2015 3:06 pm

PAINKILLER wrote:Got a ? Wayne why paint the deck red and just cover it up

The seadek will keep the boat were I can use it without worring about scratching up the deck, fancy painted decks are great but my ride buddies are 2 100ea American bulldogs so I do not want to worry about scratching the deck. The why paint it, it will show the candy red around the edges of the boat and hatch doors as well, grass rack has rino liner on the face and top, I drive this the same way as the old boat so functionality is also my goal but it does look good with all that candy red kinda hate to cover it up

PAINKILLER · Post by **PAINKILLER** » Sat Feb 14, 2015 8:44 pm

Funny you say don't want to scratch the deck a girl told me thats what airboats are made for getting scratches on the deck

shootingtheBREEZE · Post by **shootingtheBREEZE** » Sat Feb 14, 2015 9:11 pm

Wayne,

Just in time for the FREEDOM RIDE! really sweet looking setup. those blades make that boat look like its doing 100mph setting still

Bodean · Post by **Bodean** » Sat Feb 14, 2015 10:28 pm

THAT BEAST IS NASTY!

HuntingBigun · Post by **HuntingBigun** » Mon Feb 16, 2015 5:01 pm

Thanks again everyone, as you can see Killin Time is coming to life, Seadek and few other touches and we should hit the water mid week, Just outstanding job by Diamondback

See everyone at the Freedom Ride if all goes well this week , thanks for all th elooks I am really honored

SteveReid · Post by **SteveReid** » Mon Feb 16, 2015 8:57 pm

http://youtu.be/BAm4nHFOir0

HuntingBigun · Post by **HuntingBigun** » Mon Feb 16, 2015 9:52 pm

Named my Searay that in 1989 always like Killin time lol

pisswillie63 · Post by **pisswillie63** » Tue Feb 17, 2015 4:14 pm

The boat look's bad ass Wayne.

papajack · Post by **papajack** » Tue Feb 17, 2015 7:10 pm

Can't wait to line up with the uptake rotax. Just gotta spot me 350' before you hit the key. JK of course. Beautiful job Wayne.

SWAMPHUNTER45 · Post by **SWAMPHUNTER45** » Tue Feb 17, 2015 7:32 pm

Wayne it came out great! Well this is probably going to be the last boat that you get built out that really impresses me. Might as well get with the Team Diamondback crew and start specs for a TURBOPROP build!

HuntingBigun · Post by **HuntingBigun** » Tue Feb 17, 2015 8:58 pm

Thanks guys Bobby's team is awesome he has sold 3 more builds that will be open hull versions of Killin Time and Bobby says " well not sure what we will come up with next but we will think of something"

Watching his team design new stuff is too cool, it is all the small touches that make it really cool JMO. Each department has creative control so you get like 5 Bobby's for price of one. Turn Scooter, Tommy and the rest of guys loose and let them run with it

HuntingBigun · Post by **HuntingBigun** » Wed Feb 18, 2015 12:45 am

Little LED action

Sniper · Post by **Sniper** » Wed Feb 18, 2015 5:55 am

Wow Wayne the boat looks incredable, I just got back from a week in England was a the British shooting show and could not wait to log on to see where the boat was at, can't wait to see it is persom one day

HuntingBigun · Post by **HuntingBigun** » Wed Feb 18, 2015 11:24 pm

Sniper wrote:Wow Wayne the boat looks incredable, I just got back from a week in England was a the British shooting show and could not wait to log on to see where the boat was at, can't wait to see it is persom one day

Thanks Sniper we have to ride and do a little shooting as well The Seadek really did it up nice and Rusty Butraxx Seat are outstanding plus Bobby did a great good cleaning up the wiring on the Mast Motor, cannot see it but all the controls are under the engine in a sweet box add the new burp tank and custom valve covers that cover the injectors as well as the coils and clean is the word. The Senesich Sabers are nasty and after just a short run at idle really smooth. Had stop and start the seadek so finish that up in the am and time to set props and take a ride

Plus Killin Time does run !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

pipedog · Post by **pipedog** » Thu Feb 19, 2015 12:30 am

That's SWEET!! can't wait to see it in person at Palm Beach

Bad2Bone · Post by **Bad2Bone** » Thu Feb 19, 2015 5:06 am

Sweet! Can't wait to see it Saturday

SteveReid · Post by **SteveReid** » Thu Feb 19, 2015 7:16 am

What I can't figure out is why it took so dam long for someone to make a trailer with the guide rollers on the side. My carpet is already ripped and wood exposed and I was thinking about replacing the wood with rollers. Guess I will just get a new trailer now. lol...OH, By the way I like it!!

JB550 · Post by **JB550** » Thu Feb 19, 2015 8:52 am

SteveReid wrote:What I can't figure out is why it took so dam long for someone to make a trailer with the guide rollers on the side.

Huh? Been doin that for a long time steve.

Full Rut · Post by **Full Rut** » Thu Feb 19, 2015 8:56 am

Looks awesome see you this weekend!

SteveReid · Post by **SteveReid** » Thu Feb 19, 2015 9:02 am

JB550 wrote:
SteveReid wrote:What I can't figure out is why it took so dam long for someone to make a trailer with the guide rollers on the side.

Huh? Been doin that for a long time steve.

I've seen people redo them. I have bought a lot of boats in my life, never has a dealed asked me if I wanted carpet or rollers!!

Airboating Community & Resource

Airboats For Sale

Airboat Parts

Other Boats

Automotive

Other

More Links

Southern Airboat Forum

Regional Airboating Forum

Other Interesting Stuff

Archives

Member Links

Public Links

Member Links

Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover

Re: Killin Time is on the jig, birth of DB 15.6 CR Deckover