Propeller Theft Deterrent

Longest running airboat discussion on the internet.
Post Reply
User avatar
Duece
Site Supporter - I
Site Supporter - I
Posts: 2326
Joined: Tue May 31, 2005 11:43 pm

Propeller Theft Deterrent

Post by Duece »

Is there any sort of keyed bolts you can use on the hub to prevent someone from say, stealing the blades, or for that matter the entire propeller?

Duece
"Welcome to the Dark Side..."
14'x8' Diamondback 6.2 Pleasurecraft Marine Levitator 550 hp/2.37:1 Oxbox 80" JX Series Sensnich Prop

Dirtman
Site Supporter - IV
Site Supporter - IV
Posts: 301
Joined: Sun Aug 18, 2013 5:08 pm
Location: St.Cloud FL

Re: Propeller Theft Deterrent

Post by Dirtman »

If you do a search for prop lock on SA you will probably find a thread from a couple years back. Southernrican had a set up that locked the two halves of the hub together
IO520 on a 12"6" Lazer with a 72" Q #20814
Build in progress: 14x7'9" JB w/ GSO540 &80" Razor

terrible ted
Southern Airboat Member
Posts: 2857
Joined: Tue Aug 12, 2008 8:07 pm
Location: orlando

Re: Propeller Theft Deterrent

Post by terrible ted »

Find an uncommon style drive bolt. A reverse torx an anti theft or safety torx

AceNtheHole
Southern Airboat Member
Posts: 82
Joined: Wed Feb 25, 2015 7:36 pm

Re: Propeller Theft Deterrent

Post by AceNtheHole »

Maybe a motion sensor that swings the prop when someone puts their hand in there. That should deter them.

terrible ted
Southern Airboat Member
Posts: 2857
Joined: Tue Aug 12, 2008 8:07 pm
Location: orlando

Re: Propeller Theft Deterrent

Post by terrible ted »

Dehead them that way. works for me.

loudmouse
Southern Airboat Member
Posts: 482
Joined: Tue Jan 22, 2013 3:20 pm
Location: Ocala Fl

Re: Propeller Theft Deterrent

Post by loudmouse »

A remote start triggered by a motion detector. That should catch them dead in their tracks. :toothy7:
15' Alumitech deckover LSX TT Oxbox 84" JX 4-blade
Gas required Water optional :dontknow:
Built and Tuned by Me
14'X8' JW, Chevrolet 122CID LNF Turbo Engine, Ox box, 80" NGR 3 blade

Life is short, eat your dessert first! :downtown:

User avatar
mojoe
Southern Airboat Member
Posts: 953
Joined: Thu Jul 23, 2009 8:55 pm
Location: Catfish Motel

Re: Propeller Theft Deterrent

Post by mojoe »

It wouldn't be hard to make a hinged steel box to lock over the hub making it impossible to access the bolts without cutting it off. Would slow them down. But you would be out a prop any way if you ever forgot it on there and fired it up.
Mark 7:9

User avatar
MYDIXIEWRECKED
Site Supporter - IV
Site Supporter - IV
Posts: 3634
Joined: Tue Dec 18, 2007 7:48 am
Location: Plantation,fl Area 3A south camp 9 1/2

Re: Propeller Theft Deterrent

Post by MYDIXIEWRECKED »

My buddy Bruce Ward had one on his boat here in the glades. He had it made I believe. if you want I'll see if I can get you a pic and what it cost or who makes them.
THOUGHT FOR THE DAY
"People sleep peaceably in their beds only because rough men stand ready to do violence ON THEIR BEHALF"

Lifetime member NRA
Owner camp 9 1/2 in beautiful 3A south, Everglades

User avatar
In the Glades
Site Supporter - I
Site Supporter - I
Posts: 624
Joined: Mon Aug 29, 2011 5:51 pm
Location: Broward

Re: Propeller Theft Deterrent

Post by In the Glades »

That is a Bruce Ward design lol.... he had a guy locally make it for him I believe
BCAHCC Member

User avatar
CactusJack
Southern Airboat Member
Posts: 1246
Joined: Mon May 25, 2009 8:28 pm
Location: Landsborough, Queensland, Australia

Re: Propeller Theft Deterrent

Post by CactusJack »

Maybe one of these?

It is a very good deterrant :shock: :lol:
Attachments
Patented .662 cal Prop protection system.jpg
I was told I was wrong, once (not sure I believe it though)
If you can't blind 'em with brilliance, baffle 'em with BS
Airboat experience so far, limited to having bolted a gyrocopter to a flat bottom punt.... but THAT.... is about to change, bigtime :-)

Post Reply

Return to “Airboat Talk”