Jurnigans

Longest running airboat discussion on the internet.
Post Reply
JohnnyBravo
Site Supporter - V
Site Supporter - V
Posts: 212
Joined: Sun Mar 28, 2010 5:28 pm
Location: Ocala, Florida

Jurnigans

Post by JohnnyBravo » Wed Nov 25, 2015 12:49 pm

Picked up my boat from Jurnigans last Friday. I dropped it off back in may with a tired straight valve 540.
After finding out that my motor was trashed Steve and his guys built an angle valve 540 and installed it on
my boat. Wow what a difference! Can't say enough good things about Steve and his crew.

Olf Art
Site Supporter - VIII
Site Supporter - VIII
Posts: 11851
Joined: Sat Jun 03, 2006 6:33 pm
Location: Plant City, FL

Re: Jurnigans

Post by Olf Art » Wed Nov 25, 2015 12:59 pm

When you're dealing with the Jurnigan family, you're dealing with the best.
I can't say enough about the respect I have for all of them.
If it has to do with Lycoming, look no farther.

Olf
"I know not what tomorrow may bring, but I know Who brings tomorrow."
Member: KRVSA, FAA, TAA, and life member NRA and VFW

signcoc43
Southern Airboat Member
Posts: 350
Joined: Mon Dec 14, 2009 7:44 pm
Location: keystone heights fl

Re: Jurnigans

Post by signcoc43 » Wed Nov 25, 2015 3:07 pm

Stopped by the shop to just pick up a oil temp gauge and some of the nicest people I've met.
12 foot hamant fuel injected pe-90 520 conversion swinging a 68" ngq!!
" Yes my boat is slow!!!"

User avatar
Waterthunder
Site Supporter - VIII
Site Supporter - VIII
Posts: 8166
Joined: Fri Jan 21, 2005 3:16 pm
Location: Melbourne
Contact:

Re: Jurnigans

Post by Waterthunder » Wed Nov 25, 2015 3:15 pm

He is very good at his craft.
THE PROOF IS IN THE PROP!

"If you copy someone you will only achieve what has already been done."

http://waterthunder.com/
321-508-5316

User avatar
kwanjangnihm
Site Supporter - IV
Site Supporter - IV
Posts: 1927
Joined: Sat Mar 30, 2013 8:23 pm
Location: Bartow FL

Re: Jurnigans

Post by kwanjangnihm » Wed Nov 25, 2015 3:18 pm

was there earlier today picking up a case of oil and a filter for my 540 - good people!!
" I don't care who you are back in the world, you give away our position one more time, I'll bleed ya, real quiet. Leave ya here. Got that? "

Olf Art
Site Supporter - VIII
Site Supporter - VIII
Posts: 11851
Joined: Sat Jun 03, 2006 6:33 pm
Location: Plant City, FL

Re: Jurnigans

Post by Olf Art » Wed Nov 25, 2015 4:28 pm

Waterthunder wrote:He is very good at his craft.
He is, Dave ..... and if it's Lycoming he'll have it in stock. They sure helped all of us out when we had that little engine on Bud Marquis' boat rebuilt and propped. Fine folks for sure.
"I know not what tomorrow may bring, but I know Who brings tomorrow."
Member: KRVSA, FAA, TAA, and life member NRA and VFW

User avatar
Bad2Bone
Site Supporter - III
Site Supporter - III
Posts: 757
Joined: Sun Dec 07, 2008 11:24 pm
Location: Venice and Leave me Alone Lakeport,FL
Contact:

Re: Jurnigans

Post by Bad2Bone » Wed Nov 25, 2015 7:16 pm

Olf Art wrote:When you're dealing with the Jurnigan family, you're dealing with the best.
I can't say enough about the respect I have for all of them.
If it has to do with Lycoming, look no farther.

Olf
X2 !! :thumbleft: :thumbleft:
"Cleverly Disguised as Responsible Adults"

4cyl. Lycoming (sled). Croc-eyed
6 cyl. Lycoming. (Palm Beach 3/4 deck) Bad to the Bone Taxidermy
8 cyl. 502, counter-rotator 20' aluminum hull. Blew Limo

Post Reply

Return to “Airboat Talk”