DELRIN ROD

Longest running airboat discussion on the internet.
Post Reply
Lwells
Southern Airboat Member
Posts: 331
Joined: Sat Nov 15, 2014 9:18 pm
Location: okeechobee

DELRIN ROD

Post by Lwells »

Anyone know where I can buy 3 inch Delrin rod near Okeechobee, Fl

FISHSTICKER
Southern Airboat Member
Posts: 389
Joined: Wed Aug 31, 2016 11:22 am
Location: French Settlement Louisiana

Re: DELRIN ROD

Post by FISHSTICKER »

Just bought some off EBAY.

User avatar
timmmyy
Site Supporter - III
Site Supporter - III
Posts: 695
Joined: Tue Aug 31, 2010 1:40 pm
Location: sebastian Fl

Re: DELRIN ROD

Post by timmmyy »

DELRIN ROD ebay
Olways on the furst date

terrible ted
Southern Airboat Member
Posts: 2879
Joined: Tue Aug 12, 2008 8:07 pm
Location: orlando

Re: DELRIN ROD

Post by terrible ted »

Did you try McmasterCarr

terrible ted
Southern Airboat Member
Posts: 2879
Joined: Tue Aug 12, 2008 8:07 pm
Location: orlando

Re: DELRIN ROD

Post by terrible ted »

Acetal is the material name Delrin is acetal made by DuPont
https://www.mcmaster.com/acetal/wear-re ... ngth~5ft-/

Lwells
Southern Airboat Member
Posts: 331
Joined: Sat Nov 15, 2014 9:18 pm
Location: okeechobee

Re: DELRIN ROD

Post by Lwells »

terrible ted wrote:
Wed Feb 26, 2020 1:23 pm
Did you try McmasterCarr
No, but I will check, Thanks.

Lwells
Southern Airboat Member
Posts: 331
Joined: Sat Nov 15, 2014 9:18 pm
Location: okeechobee

Re: DELRIN ROD

Post by Lwells »

didn't try McmasterCarr but will check with them if someone can give me an Idea as to where they are for I have never heard of them. thanks

Lwells
Southern Airboat Member
Posts: 331
Joined: Sat Nov 15, 2014 9:18 pm
Location: okeechobee

Re: DELRIN ROD

Post by Lwells »

Oh, And I had already found it on ebay and amazon but hoped to find it in the area if it wasn't too much higher than ebay. thanks again

terrible ted
Southern Airboat Member
Posts: 2879
Joined: Tue Aug 12, 2008 8:07 pm
Location: orlando

Re: DELRIN ROD

Post by terrible ted »

McMastercarr is online supplier

https://www.mcmaster.com/

Lwells
Southern Airboat Member
Posts: 331
Joined: Sat Nov 15, 2014 9:18 pm
Location: okeechobee

Re: DELRIN ROD

Post by Lwells »

Thanks, Guys

User avatar
kwanjangnihm
Site Supporter - IV
Site Supporter - IV
Posts: 2131
Joined: Sat Mar 30, 2013 8:23 pm
Location: Bartow FL

Re: DELRIN ROD

Post by kwanjangnihm »

OK I will ask - what are you using the rods for??
He'll cut your throat, baby, stick you in the back, drive off in your Cadillac.
He's more trouble than you think, he'll kill your sugar, leave you in the drink.

Lwells
Southern Airboat Member
Posts: 331
Joined: Sat Nov 15, 2014 9:18 pm
Location: okeechobee

Re: DELRIN ROD

Post by Lwells »

I'm using it to make bushings for a lawn mower, and machining a couple Idler pulley's for the drive pumps which have a bearing pressed into each of them.

Post Reply

Return to “Airboat Talk”