Page 1 of 1

DELRIN ROD

Posted: Tue Feb 25, 2020 9:22 pm
by Lwells
Anyone know where I can buy 3 inch Delrin rod near Okeechobee, Fl

Re: DELRIN ROD

Posted: Tue Feb 25, 2020 10:52 pm
by FISHSTICKER
Just bought some off EBAY.

Re: DELRIN ROD

Posted: Wed Feb 26, 2020 10:37 am
by timmmyy
DELRIN ROD ebay

Re: DELRIN ROD

Posted: Wed Feb 26, 2020 1:23 pm
by terrible ted
Did you try McmasterCarr

Re: DELRIN ROD

Posted: Wed Feb 26, 2020 1:25 pm
by terrible ted
Acetal is the material name Delrin is acetal made by DuPont
https://www.mcmaster.com/acetal/wear-re ... ngth~5ft-/

Re: DELRIN ROD

Posted: Thu Feb 27, 2020 9:01 pm
by Lwells
terrible ted wrote:
Wed Feb 26, 2020 1:23 pm
Did you try McmasterCarr
No, but I will check, Thanks.

Re: DELRIN ROD

Posted: Thu Feb 27, 2020 9:03 pm
by Lwells
didn't try McmasterCarr but will check with them if someone can give me an Idea as to where they are for I have never heard of them. thanks

Re: DELRIN ROD

Posted: Thu Feb 27, 2020 9:04 pm
by Lwells
Oh, And I had already found it on ebay and amazon but hoped to find it in the area if it wasn't too much higher than ebay. thanks again

Re: DELRIN ROD

Posted: Sat Feb 29, 2020 9:59 pm
by terrible ted
McMastercarr is online supplier

https://www.mcmaster.com/

Re: DELRIN ROD

Posted: Thu Mar 05, 2020 11:02 am
by Lwells
Thanks, Guys

Re: DELRIN ROD

Posted: Thu Mar 05, 2020 12:08 pm
by kwanjangnihm
OK I will ask - what are you using the rods for??

Re: DELRIN ROD

Posted: Fri Mar 13, 2020 2:25 am
by Lwells
I'm using it to make bushings for a lawn mower, and machining a couple Idler pulley's for the drive pumps which have a bearing pressed into each of them.