Page 1 of 2

ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 5:21 pm
by SWAMPCRACKER
WOULD ANY OF YALL KNOW THE APPROXIMATE HORSE POWER THAT AN O-200 ANGLE VALVE PRODUCES? AND HOW DO THEY PERFORM ON LIKE A 12-13'X7" GLASS BOAT WITH A 2 SEAT SET UP AND WHAT WOULD BE A GOOD PROP SETUP FOR ONE?WARP DRIVE,WOOD,2-3 BLADE COMPOSITE ??? JUST TRYING TO GATHER SOME INFO BECAUSE I'VE BEEN THINKING OF BUYING ONE OR BUILDING ONE BECAUSE MY GRANDFATHER HAD ONE AND THAT THING WAS A BEAST...AND WOULD ANONE KNOW WHAT PRICE RANGE THESE MOTORS GO FOR AND IF THEY'RE AS RELIABLE AS I THINK THEY ARE ANY PROBLEMS WITH THESE MOTORS?ANY HELP WOULD BE APPRECIATED...THANKS...~RONNIE~

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 5:32 pm
by T. Gaffney
Do yo mean a angle valve 0-360 200 H.P.? The reason I ask is because you're talking about a 12'-13' hull. Kind of big...

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 5:36 pm
by SWAMPCRACKER
I GUESS... IS THAT WHAT AN ANGLE VALVE IS CONSIDERED AN 0-360 ??? IF SO THEN YES THATS WHAT I'M TALKING ABOUT...I NEVER KNEW WHAT THE MOTOR SPEC WAS I JUST FIGURED 0-200...IF ITS AN 0-360 THAT I'M TALKING ABOUT ARE THEY DECENT MOTORS???

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 5:38 pm
by SWAMPCRACKER
THE REASON I ASKED IS BECAUSE MY GRAND FATHER SAID THE MOTOR HE HAD WAS AN ANGLE VALVE 200 LYCOMING AND HAD IT ON A 11X7 TAYLOR HULL WITH A WOOD PROP AND I REMEMBER THAT THING BEING A BEAST WHEN I USE TO RIDE WITH HIM WHEN I WAS YOUNGER...

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 5:44 pm
by SWAMPCRACKER
I'M REALLY JUST TRYING TO FIGURE OUT WHAT MOTOR BE IT A 4-6 CYLINDER LYCOMING WOULD BE THE BEST PERFORMING ON A 12-13' GLASS BOAT AND WHAT MOTOR WOULD BE THE CHEAPEST,FUEL EFFICIENT AND HAVE PLENTY OF POWER TO PUSH 2-3 PEOPLE AND STILL BE CHEAP ON THE WALLET...AND WHAT PROP WOULD WORK THE BEST FOR IT ??? I WOULD EVEN DO GPU'S ARE 0-470'S GOOD MOTORS? SOMEONE TOLD ME THEY PRODUCE 220 HP IS THAT CORRECT?

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 5:46 pm
by T. Gaffney
In my opinion, it's one of the best if not the best A/C engine you can run. Just keep it on the right size hull and don't load it down too much. I wouldn't go over 12'. If you want to feel an awesome boat, put it on a 10'-11' boat with your back against the mags. If someone wants to ride, put them on the foot stand. That engine will last forever on a light, little boat.

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 5:53 pm
by T. Gaffney
SWAMPCRACKER wrote:I'M REALLY JUST TRYING TO FIGURE OUT WHAT MOTOR BE IT A 4-6 CYLINDER LYCOMING WOULD BE THE BEST PERFORMING ON A 12-13' GLASS BOAT AND WHAT MOTOR WOULD BE THE CHEAPEST,FUEL EFFICIENT AND HAVE PLENTY OF POWER TO PUSH 2-3 PEOPLE AND STILL BE CHEAP ON THE WALLET...AND WHAT PROP WOULD WORK THE BEST FOR IT ??? I WOULD EVEN DO GPU'S ARE 0-470'S GOOD MOTORS? SOMEONE TOLD ME THEY PRODUCE 220 HP IS THAT CORRECT?
Personally, I would put a six cylinder on a 12'-13' boat. You can get away with the 0360 but to me, you're wasting the engine on a hull that big...
Nothing wrong with the 0470/220h.p. GPU's. Definitely a difference in price!

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 5:58 pm
by SWAMPCRACKER
YEA I HEARD THEY'RE GREAT MOTORS...SO BASICALLY GO WITH A 12' AND MAKE IT A REAR DRIVER, I WOULD HAVE TO MAKE IT A 2 SEATER FOR THE OL' LADY TO RIDE ON SO A FRONT PASSENGER REAR DRIVER...DO YOU HAVE ANY PROP SUGGESTIONS THAT WOULD WORK BEST FOR AN 0360 I WONDER HOW A 2 BLADE WHISPER TIP OR A 5 BLADE WARP DRIVE WOULD WORKOUT ON ONE...

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 6:05 pm
by SWAMPCRACKER
I'M JUST TRYING TO FIND THE CHEAPEST,EFFICIENT SETUP TO RUN THAT I WOULD ENJOY AND NOT HAVE TO WORK ON EVERYTIME I TAKE IT OUT...I DON'T NEED TO DO A 100 MPH BUT I WOULD LIKE TO HAVE SOME FUN AND THE POWER TO DO SO...MY STEPDAD HAD AN 0470 ON HIS 13X7 COTTONMOUTH WITH A 5 BLADE WARP DRIVE WITH A SINGLE REAR DRIVER AND DOUBLE FRONT PASSENGER AND IT WAS A PRETTY DESCENT RUNNING BOAT...I MAY JUST DO A SETUP LIKE THAT FOR MYSELF...I'M WANTING TO BUY A BOAT ASAP SINCE I DON'T HAVE ONE NOW AND I'M TIRED OF RIDING ON OTHER PEOPLES BOATS OR NOT BEING ABLE TO GO OUT AT ALL...AT ONE TIME I WAS THINKING ABOUT BUYING A DD 350 BOAT BUT I'VE HEARD TO MANY HORROR STORIES ABOUT THOSE SETUPS...I JUST WANT SOMETHING SIMPLE AND THATS RELIABLE

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 6:16 pm
by hogdoggin
SwampCracker if you look in my pics at my boat it has a 0360 on it i had the motor on two 12' Aluimtech hulls it ran good on both of those and now i have it on a 11' 3/4 deck boat and it runs the hill awesome. The best thing about it is I can run all day and still come home with gas in the tank.

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 6:31 pm
by SWAMPCRACKER
THATS WHAT I'M TALKING ABOUT !!! :P I WOULD LOVE TO RUN HARD ALL DAY WITH FUEL LEFT IN THE TANK WHEN I GET HOME... MY DECISION WILL BE BETWEEN BOTH THE 0-360 AND OR THE 0-470 ON LIKE A 12'X13'X7" COTTON MOUTH,RIVER MASTER,GILILEO,BANDIT HULL...WITH A 5 BLADE WARP DRIVE OR A 2 BLADE WHISPER TIP OR 2 BLADE WHIRL WIND...I LIKE GLASS BOATS BECAUSE THEY'RE GREAT IN ALL WATER DEPTHS THEY SLIDE GREAT AND IF I PUNCH A HOLE IN IT I CAN PATCH IT RITE UP DEPENDING ON HOW SEVERE IT IS..

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 6:45 pm
by SWAMPCRACKER
Hey " HOGDOGGING " That new boat of yours did you happen to buy it from guy named Keith from Ft.Lauderdale, The hull looks exactly like my old one that i sold him...When i sold it to him it was a non painted aluminum hull on a bright orange trailer with black carpeted boards...Just wondering if thats the boat or not...

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 6:49 pm
by boobidges
thats probly the best -bang for your buck all around setup you're gonna get(0-470/cotton mouth)

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Wed Dec 02, 2009 6:59 pm
by Bucknasty
I think for the money, a good GPU220 on a 12ft White hull would do everything you want. It would be one of your cheaper options.

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Thu Dec 03, 2009 2:21 pm
by MYDIXIEWRECKED
Ronnie, I ran a boat with a 200 for years. I first had it on a bill vaugh 10' full deck. Ran awesome. Then I got a 12' wilcox step boat(with the 200). That was by far the funnest/fastest little boat I ever owned! Wish I still had it but I can't tote the whole fam damily with that so I had to go to the dark side...

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Thu Dec 03, 2009 2:55 pm
by Whitebear
SWAMPCRACKER wrote:WOULD ANY OF YALL KNOW THE APPROXIMATE HORSE POWER THAT AN O-200 ANGLE VALVE PRODUCES? AND HOW DO THEY PERFORM ON LIKE A 12-13'X7" GLASS BOAT WITH A 2 SEAT SET UP AND WHAT WOULD BE A GOOD PROP SETUP FOR ONE?WARP DRIVE,WOOD,2-3 BLADE COMPOSITE ??? JUST TRYING TO GATHER SOME INFO BECAUSE I'VE BEEN THINKING OF BUYING ONE OR BUILDING ONE BECAUSE MY GRANDFATHER HAD ONE AND THAT THING WAS A BEAST...AND WOULD ANONE KNOW WHAT PRICE RANGE THESE MOTORS GO FOR AND IF THEY'RE AS RELIABLE AS I THINK THEY ARE ANY PROBLEMS WITH THESE MOTORS?ANY HELP WOULD BE APPRECIATED...THANKS...~RONNIE~
An O-200 is 100 HP I think.

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Thu Dec 03, 2009 3:00 pm
by MYDIXIEWRECKED
Your right Bear. A O-200 is definately a 100 hp engine. Ronnie is talking about an O-360 for sure. He just explained it a little off. I have never seen an O-200 angle valve. If they make any cylinders like that I want 4 for my sons O-200 I have in the shed for his first boat! :D :D

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Thu Dec 03, 2009 4:10 pm
by SWAMPCRACKER
Hey Chester, what motor does your Dad run on his boat ? is it an 0-360? and is that what an angle valve is considered? Maybe you could help me but do you remember what motor my Grandfather " MIKE VOSTAL " Had on his boat? " RAT RACE REMEDIES " I'm starting to think it was an 0-360 but I may be wrong...I know an 0-360 would be to small for like a 12-13'x7 cotton mouth hull which is what i would want for my next boat...I was thinking of going with a c/m but i dont want to have to work on it all the time not saying they suck but I would lose my patience after a couple times of fixing them...So I'm just gonna go with a/c or gpu like an 0-470 and I think I would enjoy it a little more and maybe slap a 5 blade warp drive pitched out or a 2 blade whirl wind or whisper tip and see how it runs like that...

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Thu Dec 03, 2009 4:25 pm
by Muddyduck
http://www.southernairboat.com/classifi ... duct=13500

buy this step hull in the classifieds and hang on for the ride.

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Thu Dec 03, 2009 4:38 pm
by SWAMPCRACKER
Haha yea right I wish if I had $ 14,500 for a boat then maybe...But I would be answering to the ol' lady after that...I would end up killing myself on that thing :wink:

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Thu Dec 03, 2009 6:39 pm
by Bushman
0-360 200hp on a 12 ft Hammant hull would be super sweet. These hulls run so free in the water and run the hill great also. Around $3,500 for the hull, this price is my best guess! You wouldn't be disappointed!

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Thu Dec 03, 2009 6:58 pm
by Glenn P Barrett
i run a 200 angle valve on a 12" Gilileo. It goes anywhere i point it. Brand new hull is $2000.

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Thu Dec 03, 2009 7:55 pm
by Waggs
I'm plannin on puttin O-360 on a 11.5 predator for my next one. My O-320 on my boat goes anywhere. Before I get a O-360 Ima put my 320 on a pred.

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Thu Dec 03, 2009 10:25 pm
by 0360Dominator
chesters dads boat is a 0470 contential 220 horse but its an aircraft not gpu. and my dad had a 0360 180 hp on a 13 foot bandit hull and it ran just fine ran the dry and everything best thing we ever did to that boat was put a sensnich q series on it

Re: ANGLE VALVE 0-200 HORSEPOWER?

Posted: Fri Dec 04, 2009 1:34 am
by SWAMPCRACKER
Here's a drawing of what i would like my next boat to look like...a 13'x7' Cotton Mouth with an 0-470 and a 2 blade whisper tip series prop...Sooner or later i'll have something like this in the near future out in the woods...keep an eye out for it...Hope yall like my idea...~Ronnie~