has anyone ever dealt with Everglades sportsman

Aircraft powered airboat discussion.
Post Reply
Pimp Slow
Southern Airboat Member
Posts: 141
Joined: Tue May 04, 2010 11:08 pm
Location: DeLeon Springs

has anyone ever dealt with Everglades sportsman

Post by Pimp Slow » Tue Apr 08, 2014 8:50 pm

Has anyone ever dealt with Everglades sportsman from citrus county. I talked to him tonight and he seems very knowledgeable. I was gonna have him overhaul some cylinders and do some work and his prices seem fair. Just wondering if anyone has dealt with him and how did it turn out. Not trying to start a bashing thread just want to know if you were satisfied with the work done. Trying to help out the smaller guys.
10' 6" Taylor deckover
0320 s/v lycoming
6 blade warp drive
Just a lil 4 banger

Southern_Son91
Southern Airboat Member
Posts: 48
Joined: Sun Feb 03, 2013 7:53 am
Location: citrus county

Re: has anyone ever dealt with Everglades sportsman

Post by Southern_Son91 » Tue Apr 08, 2014 9:19 pm

I work with them a lot actually and he's great to work with and a very smart man.
200 HP 4 cylinder 320 with 480 angle valve jugs, nitrous,and the balls to drive it right.
if your not living on the edge your taking up to much space.

Southern_Son91
Southern Airboat Member
Posts: 48
Joined: Sun Feb 03, 2013 7:53 am
Location: citrus county

Re: has anyone ever dealt with Everglades sportsman

Post by Southern_Son91 » Tue Apr 08, 2014 9:20 pm

Also he is a top notch hull builder. One of the best deck over I've seen yet. Very light and very sleek looking .
200 HP 4 cylinder 320 with 480 angle valve jugs, nitrous,and the balls to drive it right.
if your not living on the edge your taking up to much space.

Post Reply

Return to “Aircraft Power Only”