lycoming 0320 oil press adjustment

Aircraft powered airboat discussion.
Post Reply
99squeakbox
Southern Airboat Member
Posts: 36
Joined: Tue Aug 26, 2014 7:49 pm

lycoming 0320 oil press adjustment

Post by 99squeakbox » Thu Apr 02, 2015 7:24 pm

so my boat when warn idles at around 25-30 psi and running gets to about 50psi. It seemed a little low to me. Just put one brand new jug on it. Is there any way to adjust this or is that about normal? I'm new to all this and it's my first boat any help would be greatly appreciated. :rebel: :rebel: :rebel:

User avatar
JT540
Site Supporter - V
Site Supporter - V
Posts: 1506
Joined: Mon Jun 18, 2007 8:12 pm
Location: mt dora fl

Re: lycoming 0320 oil press adjustment

Post by JT540 » Thu Apr 02, 2015 9:21 pm

That's within Lycoming limits.
"THE MORE I LEARN ABOUT WOMEN THE MORE I LOVE MY AIRBOAT"

twister69z
Site Supporter - IV
Site Supporter - IV
Posts: 1848
Joined: Tue Feb 23, 2010 6:04 pm
Location: Nebraska

Re: lycoming 0320 oil press adjustment

Post by twister69z » Sun Apr 05, 2015 11:15 am

The pressure is adjustable , depending on the type of oil pressure cap you have installed on your engine. If it does not have a adjusting nut on it oil pressure is adjusted by two methods. One is adding AN 960 washers behind the SPRING IN THE CAP not against the ball. Second method is to change the spring to give different tensions at given pressures. There are different wire diameter springs along with different lengths to provide a range of combinations to provide higher pressures at lower RPMs or vice versa.
If the cap has a adjustment screw tighten or loosten it accordingly. Also using different springs . The springs are colored white, yellow, gold , and no color.
Hope this helps
Twister69z
If you don't have time to do it right the first time ,
Where are you going to get the time to do it a second time?

Post Reply

Return to “Aircraft Power Only”