Flange for IGSO

Aircraft powered airboat discussion.
robert cockcroft
Southern Airboat Member
Posts: 51
Joined: Mon Oct 19, 2009 10:13 am

Flange for IGSO

Postby robert cockcroft » Sun Jan 03, 2016 5:22 pm

I just purchased an IGSO480, I need the flange installed. Anyone know who does this work?

robert cockcroft
Southern Airboat Member
Posts: 51
Joined: Mon Oct 19, 2009 10:13 am

Re: Flange for IGSO

Postby robert cockcroft » Sun Jan 03, 2016 5:29 pm

Flange for prop.

Outlawaircraftengines
Site Supporter - I
Site Supporter - I
Posts: 1019
Joined: Mon Sep 04, 2006 9:49 pm
Location: Plant City
Contact:

Re: Flange for IGSO

Postby Outlawaircraftengines » Sun Jan 03, 2016 6:22 pm

give me a ring, I can get it done.
Gary Barber
Outlaw Aircraft Engines
www.outlawaircraftengines.com
863-698-0383

Dirtman
Site Supporter - IV
Site Supporter - IV
Posts: 293
Joined: Sun Aug 18, 2013 5:08 pm
Location: St.Cloud FL

Re: Flange for IGSO

Postby Dirtman » Mon Jan 04, 2016 6:55 am

do a search for Abner Thornton and find his number he does a great job
IO520 on a 12"6" Lazer with a 72" Q #20814
Build in progress: 14x7'9" JB w/ GSO540 &80" Razor

Quick Draw
Site Supporter - II
Site Supporter - II
Posts: 605
Joined: Mon Jul 09, 2012 4:31 pm
Location: Plam Beach County

Re: Flange for IGSO

Postby Quick Draw » Mon Jan 04, 2016 10:05 am

Dirtman wrote:do a search for Abner Thornton and find his number he does a great job

Yea he's has a awesome setup for the gso. Nothing welded just pressed on with a Keyway. And made out of billet aluminum with a starter & alt bracket. Not sure the cost on it.

robert cockcroft
Southern Airboat Member
Posts: 51
Joined: Mon Oct 19, 2009 10:13 am

Re: Flange for IGSO

Postby robert cockcroft » Mon Jan 04, 2016 10:45 am

Does anyone have Abner Thorton #, or where he is located??

And thanks for the response.

User avatar
farmboy
Site Supporter - VIII
Site Supporter - VIII
Posts: 2588
Joined: Sun Dec 11, 2011 3:20 pm
Location: Belle Glade . FL

Re: Flange for IGSO

Postby farmboy » Mon Jan 04, 2016 12:27 pm

robert cockcroft wrote:Does anyone have Abner Thorton #, or where he is located??

And thanks for the response.

I have it. I will post it on here in a few minutes. Abner does make a very nice setup for sure. I don't remember what I paid for mine and it was the first one that he built so I don't know if price has went up or down.
14ft JB Hull,Lycoming GSO480 w/water-meth injection,Sensenich 3-blade "R",ButtRaxx seats,B&S Trailer.

Member of Glades Airboat & Buggy Association / Kissimmee River Valley Sportsman Association

User avatar
farmboy
Site Supporter - VIII
Site Supporter - VIII
Posts: 2588
Joined: Sun Dec 11, 2011 3:20 pm
Location: Belle Glade . FL

Re: Flange for IGSO

Postby farmboy » Mon Jan 04, 2016 12:28 pm

He's in Okeechobee.
14ft JB Hull,Lycoming GSO480 w/water-meth injection,Sensenich 3-blade "R",ButtRaxx seats,B&S Trailer.

Member of Glades Airboat & Buggy Association / Kissimmee River Valley Sportsman Association

User avatar
speed wheelie
Site Supporter - V
Site Supporter - V
Posts: 1266
Joined: Fri Mar 02, 2007 9:34 pm
Location: Winter Haven Fl

Re: Flange for IGSO

Postby speed wheelie » Mon Jan 04, 2016 12:30 pm

Abner 863 261-2340
You got to be yourself
863-956-3030 shop and cell

robert cockcroft
Southern Airboat Member
Posts: 51
Joined: Mon Oct 19, 2009 10:13 am

Re: Flange for IGSO

Postby robert cockcroft » Mon Jan 04, 2016 8:29 pm

Thanks for all the help.



Farmboy, I heard you are the person to talk to about these motors? I have the complete motor with supercharger, gear box and fuel injection. I have been getting mixed opinions about the fuel injections on whether to keep it or go carb? Don't know anything about these motors and less about the fuel injection so any advice would be appreciated.

Dirtman
Site Supporter - IV
Site Supporter - IV
Posts: 293
Joined: Sun Aug 18, 2013 5:08 pm
Location: St.Cloud FL

Re: Flange for IGSO

Postby Dirtman » Tue Jan 05, 2016 5:42 am

Farmboy and TIGO541 are a wealth of knowledge as well as a few more on this site and they seem more than welcome to give help when needed. Good luck with the new build and let us see some pics as it goes along
IO520 on a 12"6" Lazer with a 72" Q #20814
Build in progress: 14x7'9" JB w/ GSO540 &80" Razor

User avatar
farmboy
Site Supporter - VIII
Site Supporter - VIII
Posts: 2588
Joined: Sun Dec 11, 2011 3:20 pm
Location: Belle Glade . FL

Re: Flange for IGSO

Postby farmboy » Tue Jan 05, 2016 6:44 am

robert cockcroft wrote:Thanks for all the help.



Farmboy, I heard you are the person to talk to about these motors? I have the complete motor with supercharger, gear box and fuel injection. I have been getting mixed opinions about the fuel injections on whether to keep it or go carb? Don't know anything about these motors and less about the fuel injection so any advice would be appreciated.

Robert in my opinion for a ride or hunt boat a good carb is very hard to beat... A 750 A.E.D or Quick Fuel work very well on those motors. Also Hamant or Cecil Field builds a nice intake for it. If it where a race boat then I probably would lean towards the fuel injection. I know a few people that's changed from the fuel injection to a carb and was happier with it. Also Cecil does have the AED's in stock. If you need his # let me know.
14ft JB Hull,Lycoming GSO480 w/water-meth injection,Sensenich 3-blade "R",ButtRaxx seats,B&S Trailer.

Member of Glades Airboat & Buggy Association / Kissimmee River Valley Sportsman Association

robert cockcroft
Southern Airboat Member
Posts: 51
Joined: Mon Oct 19, 2009 10:13 am

Re: Flange for IGSO

Postby robert cockcroft » Tue Jan 05, 2016 7:01 am

Thanks to everyone for the information, I am sure I will have a lot more questions later.

User avatar
farmboy
Site Supporter - VIII
Site Supporter - VIII
Posts: 2588
Joined: Sun Dec 11, 2011 3:20 pm
Location: Belle Glade . FL

Re: Flange for IGSO

Postby farmboy » Tue Jan 05, 2016 7:32 am

robert cockcroft wrote:Thanks to everyone for the information, I am sure I will have a lot more questions later.

No problem man anything I can do to help. I don't know how to post pics to a trend but I'm gonna post the gearbox flange setup that Abner builds in the picture gallery.
14ft JB Hull,Lycoming GSO480 w/water-meth injection,Sensenich 3-blade "R",ButtRaxx seats,B&S Trailer.

Member of Glades Airboat & Buggy Association / Kissimmee River Valley Sportsman Association

krazymatt
Southern Airboat Member
Posts: 251
Joined: Mon Feb 01, 2010 9:08 pm
Location: Cocoa

Re: Flange for IGSO

Postby krazymatt » Thu Jan 07, 2016 10:48 am

farmboy wrote:
robert cockcroft wrote:Thanks to everyone for the information, I am sure I will have a lot more questions later.

No problem man anything I can do to help. I don't know how to post pics to a trend but I'm gonna post the gearbox flange setup that Abner builds in the picture gallery.


here are the ones you sent me awhile back...
Attachments
abnerbox3.JPG
abnerbox1.JPG

krazymatt
Southern Airboat Member
Posts: 251
Joined: Mon Feb 01, 2010 9:08 pm
Location: Cocoa

Re: Flange for IGSO

Postby krazymatt » Thu Jan 07, 2016 10:51 am

the other 2.
Attachments
abnerbox2.jpg
abnerbox4.jpg

robert cockcroft
Southern Airboat Member
Posts: 51
Joined: Mon Oct 19, 2009 10:13 am

Re: Flange for IGSO

Postby robert cockcroft » Thu Jan 07, 2016 7:47 pm

I talked Abner yesterday I am sending mine down within the next week. Those looks like a nice set up and farmboy I seen the one you posted in pictures and wallpapers. looks great.


Again thanks for all the posts, it really helped me out.

terrible ted
Southern Airboat Member
Posts: 2824
Joined: Tue Aug 12, 2008 8:07 pm
Location: orlando

Re: Flange for IGSO

Postby terrible ted » Thu Jan 07, 2016 9:25 pm

krazymatt wrote:
farmboy wrote:
robert cockcroft wrote:Thanks to everyone for the information, I am sure I will have a lot more questions later.

No problem man anything I can do to help. I don't know how to post pics to a trend but I'm gonna post the gearbox flange setup that Abner builds in the picture gallery.


here are the ones you sent me awhile back...


That look sweet what the price tag on that. I have a VO 540 with the end plate kit not a box.

User avatar
farmboy
Site Supporter - VIII
Site Supporter - VIII
Posts: 2588
Joined: Sun Dec 11, 2011 3:20 pm
Location: Belle Glade . FL

Re: Flange for IGSO

Postby farmboy » Fri Jan 08, 2016 7:25 am

robert cockcroft wrote:I talked Abner yesterday I am sending mine down within the next week. Those looks like a nice set up and farmboy I seen the one you posted in pictures and wallpapers. looks great.


Again thanks for all the posts, it really helped me out.

No problem man let me know if there's anything I can help you with.
14ft JB Hull,Lycoming GSO480 w/water-meth injection,Sensenich 3-blade "R",ButtRaxx seats,B&S Trailer.

Member of Glades Airboat & Buggy Association / Kissimmee River Valley Sportsman Association

User avatar
farmboy
Site Supporter - VIII
Site Supporter - VIII
Posts: 2588
Joined: Sun Dec 11, 2011 3:20 pm
Location: Belle Glade . FL

Re: Flange for IGSO

Postby farmboy » Fri Jan 08, 2016 7:25 am

Thanks Matt for posting those pictures.
14ft JB Hull,Lycoming GSO480 w/water-meth injection,Sensenich 3-blade "R",ButtRaxx seats,B&S Trailer.

Member of Glades Airboat & Buggy Association / Kissimmee River Valley Sportsman Association


Return to “Aircraft Power Only”

Who is online

Users browsing this forum: No registered users and 22 guests