av200 build

Aircraft powered airboat discussion.
Post Reply
pilgrim1112
Southern Airboat Member
Posts: 69
Joined: Tue Feb 01, 2011 12:27 am
Location: southwest ranches, fort lauderdale
Contact:

av200 build

Post by pilgrim1112 »

ok guys ive got my av200 off the boat and gonna tear it down to go through and paint to match the boat. Was wondering since I'm goin in was thinking about new 10:1 or 12:1 what are your guys suggestions. its is a stock av 200 with updraft 4-5 carb now and any recommendations for possible cam?? but don't know which one ive read 290 grind but hey idk that's why I'm asking. is it worth me to do all this and if so what kinda numbers do you think ill see after also since ill have cylinders off should I bore or no theres nothing wrong with it just tearing down to paint and go through

jeepinocala1111
Site Supporter - I
Site Supporter - I
Posts: 1150
Joined: Mon Apr 21, 2014 5:57 pm

Re: av200 build

Post by jeepinocala1111 »

pilgrim1112 wrote:ok guys ive got my av200 off the boat and gonna tear it down to go through and paint to match the boat. Was wondering since I'm goin in was thinking about new 10:1 or 12:1 what are your guys suggestions. its is a stock av 200 with updraft 4-5 carb now and any recommendations for possible cam?? but don't know which one ive read 290 grind but hey idk that's why I'm asking. is it worth me to do all this and if so what kinda numbers do you think ill see after also since ill have cylinders off should I bore or no theres nothing wrong with it just tearing down to paint and go through
If that is a 0-200 very much like the pe-90 then my opinion is get some large cylinders I have seen the pe90 with 470 cylinders kick butt.

Outlawaircraftengines
Site Supporter - I
Site Supporter - I
Posts: 1019
Joined: Mon Sep 04, 2006 9:49 pm
Location: Plant City
Contact:

Re: av200 build

Post by Outlawaircraftengines »

give me a ring buddy. I have pistons, custom cam grinds, ect. All the stuff you need and can also do the jug overhauls for you. 863-698-0383
Gary Barber
Outlaw Aircraft Engines
www.outlawaircraftengines.com
863-698-0383

diamondback0320
Southern Airboat Member
Posts: 1333
Joined: Thu Aug 20, 2009 3:09 pm
Location: palm bay,fl

Re: av200 build

Post by diamondback0320 »

it says av 200 not 0-200!

Skeeter-Gee
Site Supporter - I
Site Supporter - I
Posts: 128
Joined: Tue Jan 25, 2011 6:03 pm

Re: av200 build

Post by Skeeter-Gee »

Hey gary do you have any 180 nd cylinders ready to go ? if so how much , i got a leaky exhaust valve or seat on #1

pirate
Site Supporter - V
Site Supporter - V
Posts: 1497
Joined: Tue Jul 26, 2005 1:46 pm
Location: Hernando Fl

Re: av200 build

Post by pirate »

What the heck is an av 200?

Is that an angle valve IO/O/360?

A lot of folks assume that because it has angle valves and is 360 CID means it develops 200 hp. Many only develop 180 hp and a couple, less. That being said, 10:1 pistons work just fine but you need to run av gas. Jr. Jurnigan can get an experimental Lycoming grind cam that along with the pistons should bump the hp to around 220, but they're pricey.
Compromise is failure on the installment plan.

pilgrim1112
Southern Airboat Member
Posts: 69
Joined: Tue Feb 01, 2011 12:27 am
Location: southwest ranches, fort lauderdale
Contact:

Re: av200 build

Post by pilgrim1112 »

thx for the replys guys gary ill prolly call you tomorrow sometime. it is an angle valve 0360 with a ma4-5 so that makes it around 190 hp now just want to get a lil more out of it that's all nothing crazy so ill prolly go with the 290 grind cam and 10:5 - 1 pistons if I can get a good deal and I guess ill have to change the main jet in carb as well but well see

GMAC 76
Site Supporter - V
Site Supporter - V
Posts: 1270
Joined: Sun Jan 04, 2009 11:12 pm
Location: LAKE PLACID FL.... LAKE ISTOKPOGA

Re: av200 build

Post by GMAC 76 »

if your carb is an MA-4-5 off an 0-360/180hp a really good main nozzle change for the AV 200 is the 47-725 from the 210hp franklin carb

billybob
Southern Airboat Member
Posts: 1424
Joined: Wed Nov 25, 2009 7:34 pm
Location: Lake Alfred, Fl.

Re: av200 build

Post by billybob »

I'm not sure if they are still in the classifieds but a fella had 4 11487's for sale. New.
I do all my own stunts!!!!!!

Walter Sobchak
Southern Airboat Member
Posts: 2
Joined: Wed Aug 17, 2016 6:39 am

Re: av200 build

Post by Walter Sobchak »

jeepinocala1111 wrote:
pilgrim1112 wrote:ok guys ive got my av200 off the boat and gonna tear it down to go through and paint to match the boat. Was wondering since I'm goin in was thinking about new 10:1 or 12:1 what are your guys suggestions. its is a stock av 200 with updraft 4-5 carb now and any recommendations for possible cam?? but don't know which one ive read 290 grind but hey idk that's why I'm asking. is it worth me to do all this and if so what kinda numbers do you think ill see after also since ill have cylinders off should I bore or no theres nothing wrong with it just tearing down to paint and go through
If that is a 0-200 very much like the pe-90 then my opinion is get some large cylinders I have seen the pe90 with 470 cylinders kick butt.
WTF Donny?!

Post Reply

Return to “Aircraft Power Only”