rebuild a 220

Aircraft powered airboat discussion.
blowboatbandit
Southern Airboat Member
Posts: 86
Joined: Tue Feb 14, 2012 10:19 am
Location: polk county

rebuild a 220

Postby blowboatbandit » Tue Feb 28, 2017 3:16 pm

2 years ago I left my boat with a guy to rebuild my dual mag pe-150 470 angle valve motor that spun a rod bearing. I wanted a std-std crank installed which took a while to find. anyways guy has some problems and is giving me my boat back,soon I hope. Looking for someone that can rebuild the lower end in a timely and professional manner. if guy is good on his word, hes giving me the std crank and some other things as well. top end has 17hr on it if I remeber correct.
Doing what I do best.. showing off..

User avatar
Deano
Site Supporter - V
Site Supporter - V
Posts: 4269
Joined: Thu Jan 06, 2005 11:16 am
Location: Inverness, FL

Re: rebuild a 220

Postby Deano » Wed Mar 01, 2017 8:31 pm

You might try calling Tom Jeffords and talk to him.
He's Speed Wheelie on this board. I believe his number is 863-956-3030.
"The suppression of uncomfortable ideas may be common in religion and politics,
but it is not the path to knowledge; it has no place in the endeavor of science."
- Carl Sagan

blowboatbandit
Southern Airboat Member
Posts: 86
Joined: Tue Feb 14, 2012 10:19 am
Location: polk county

Re: rebuild a 220

Postby blowboatbandit » Thu Mar 02, 2017 1:35 pm

Thanks..
Doing what I do best.. showing off..

User avatar
glades cat
Site Supporter - III
Site Supporter - III
Posts: 2992
Joined: Mon Jan 22, 2007 2:36 pm
Location: Miami, Fl

Re: rebuild a 220

Postby glades cat » Thu Mar 02, 2017 2:38 pm

Tom Jeffords is a great person and top notch mechanic. He's done work for me and I drove 4 hours to see him. Top shelf for sure. Speed Wheelie is a go to guy. The work he performed has lasted years without a flaw.
"Leave a legacy...Preserve the irreplaceable"
12' x 7' sled built by Scorpion, Cont. O-470-K, 72" Whisper Tip
Rigged by Gladescat & sons in 2009


Return to “Aircraft Power Only”

Who is online

Users browsing this forum: No registered users and 4 guests