BBC Headers from Alumitec

Automotive powered airboat discussion.
Onearmgary
Site Supporter - I
Site Supporter - I
Posts: 22
Joined: Wed Dec 26, 2012 3:44 pm
Location: Satellite Beach, Fl

BBC Headers from Alumitec

Postby Onearmgary » Wed Oct 25, 2017 7:57 pm

Just wanted to say that I have had arguably the best customer experience I have ever had. Ordered a new set of headers for my boat on Monday through the Alumitec website, Tuesday Brad from the shop called to ask me how I would like them built, Wednesday they were finished. They supplied pics of the headers throughout the build and of the finished product. They then called to let me know when they were finished. I have dealt with them in the past and always had great service but this was beyond that, all for some headers. Not only are they good people, they do an excellent job and turn out an excellent product for less cash than most charge for lesser quality. I cannot say enough good things about Brad, Raymond, and the crew at Alumitec. Highly recommend them for anything you might need.

Sent from my XT1650 using Tapatalk

One Eyed Gator
Southern Airboat Member
Posts: 1161
Joined: Wed May 30, 2007 11:33 am
Location: Ocala,Fl

Re: BBC Headers from Alumitec

Postby One Eyed Gator » Thu Oct 26, 2017 7:33 am

Yep very good service. They have built 3 sets for me. Last set I asked for a few specific thing to be done. Brad did just what I asked and the additional charge was minimal.

User avatar
pontoon outlaw
Site Supporter - IV
Site Supporter - IV
Posts: 1595
Joined: Fri Dec 04, 2009 7:56 pm
Location: palm bay, ride in Cocoa

Re: BBC Headers from Alumitec

Postby pontoon outlaw » Fri Oct 27, 2017 6:56 am

Got my long tubes from them 5 years ago for my cad 507 still going strong

Sent from my E6833 using Southern Airboat mobile app powered by Tapatalk

Ribcracker
Southern Airboat Member
Posts: 4
Joined: Fri Sep 23, 2011 8:46 am

Re: BBC Headers from Alumitec

Postby Ribcracker » Tue Oct 31, 2017 12:16 pm

same here, after the dyno report on my 632 they built the exact headers I spec'd. to the TTTTT. beautiful job.

User avatar
Prototype
Southern Airboat Member
Posts: 639
Joined: Sat Jan 26, 2013 2:28 pm

Re: BBC Headers from Alumitec

Postby Prototype » Fri Nov 03, 2017 7:06 pm

So, Am I the only one that found there BBC flanges so big that the plugs cannot be removed without grinding or grinding two sets of sockets?


Return to “Automotive Power Only”

Who is online

Users browsing this forum: No registered users and 10 guests