ECOTEC 2.0 LTG SWAP

Automotive powered airboat discussion.
Post Reply
FISHSTICKER
Southern Airboat Member
Posts: 395
Joined: Wed Aug 31, 2016 11:22 am
Location: French Settlement Louisiana

Re: ECOTEC 2.0 LTG SWAP

Post by FISHSTICKER »

3 hours to pull the cage and motor. Not too bad. Found some oil in the intake right where the PCV system connects up stream of the turbo. I guess I’ll look into a catch can. Supposedly oil consumption can get significant on some of these motors at higher boost levels. I’m also going to use this opportunity to make a few other mods to the setup.

Image
Top
Post Reply

Return to “Automotive Power Only”