Seat covers

A general, non-powerplant specific, discussion on airboat technology, ie., hulls, rigging, polymer, etc..
Post Reply
Sideways56
Southern Airboat Member
Posts: 39
Joined: Sun Apr 28, 2013 10:05 pm
Location: Brevard

Seat covers

Post by Sideways56 » Mon Apr 29, 2013 6:49 pm

Anybody know someone that will make seat cover and have a decent turn around?

User avatar
Florida Cracker
Site Supporter - IV
Site Supporter - IV
Posts: 290
Joined: Tue Mar 15, 2005 4:18 pm
Location: Southeast Florida

Re: Seat covers

Post by Florida Cracker » Mon Apr 29, 2013 6:51 pm

Where are you?

User avatar
farmboy
Site Supporter - VIII
Site Supporter - VIII
Posts: 2588
Joined: Sun Dec 11, 2011 3:20 pm
Location: Belle Glade . FL

Re: Seat covers

Post by farmboy » Mon Apr 29, 2013 8:21 pm

Sideways56 wrote:Anybody know someone that will make seat cover and have a decent turn around?
Buttraxxs :thumbleft:
14ft JB Hull,Lycoming GSO480 w/water-meth injection,Sensenich 3-blade "R",ButtRaxx seats,B&S Trailer.

Member of Glades Airboat & Buggy Association / Kissimmee River Valley Sportsman Association

mudbass
Southern Airboat Member
Posts: 88
Joined: Sun Sep 16, 2012 9:55 pm
Location: Brooksville

Re: Seat covers

Post by mudbass » Mon Apr 29, 2013 8:35 pm

Floral city airboats does some nice seats, in decent time frame.
When life gives you lemons... Sell those lemons and buy an airboat!

mudwizer
Southern Airboat Member
Posts: 191
Joined: Thu Jan 26, 2012 11:39 am

Re: Seat covers

Post by mudwizer » Mon Apr 29, 2013 8:39 pm

butt raxxs
rusty 561 5423886

User avatar
Southern Style
Site Supporter - IV
Site Supporter - IV
Posts: 5239
Joined: Mon Oct 06, 2008 3:34 pm
Location: Sarno marsh

Re: Seat covers

Post by Southern Style » Mon Apr 29, 2013 8:42 pm

Rigsby.. Depending on where ya are//
DONT ARGUE WITH STUPIDITY...THEY WILL JUST DRAG YOU DOWN TO THEIR LEVEL, AND BEAT YOU WITH EXPERIENCE.....
KRVSA Member
SJRAA Member
KCCO

matt6007
Southern Airboat Member
Posts: 9
Joined: Sat Mar 30, 2013 10:13 pm
Location: Williston Fl

Re: Seat covers

Post by matt6007 » Mon Apr 29, 2013 9:01 pm

Floral City told me last week two to three weeks and the last covers I bought from them were nice. :violent1:
16' Hartline 350 saltwater fishing machine

User avatar
Prototype
Southern Airboat Member
Posts: 770
Joined: Sat Jan 26, 2013 2:28 pm

Re: Seat covers

Post by Prototype » Mon Apr 29, 2013 9:30 pm

Lynn's Stitch at 352-341-6213 but she's on vacation this week with family! Invernes area but she is online too.

Tell her you want orange ostrich,,,,,,,,,,,,,,,,,,,,,,, as a joke! She'll probably cut you a deal on anything but?

big3country8
Southern Airboat Member
Posts: 1795
Joined: Mon Jun 04, 2007 10:25 pm
Location: merritt island

Re: Seat covers

Post by big3country8 » Mon Apr 29, 2013 10:12 pm

Buttrax give rusty a call
Temporary High
12' clendenin aluminum step with poly, 418 waterthunder, 2.68 OX, 9 blade saber, ATF rigged, nitrous outlet,, buttrax custom seats.

Sideways56
Southern Airboat Member
Posts: 39
Joined: Sun Apr 28, 2013 10:05 pm
Location: Brevard

Re: Seat covers

Post by Sideways56 » Tue Apr 30, 2013 2:22 am

I'm located in Palm Bay (brevard)

User avatar
milo540
Southern Airboat Member
Posts: 246
Joined: Tue Feb 01, 2011 3:59 pm
Location: geneva/ debary,fl

Re: Seat covers

Post by milo540 » Tue Apr 30, 2013 4:55 am

Buttraxx give rusty a call won't find a better seat! And his turn around is quick!!!
13ft hull stainless rigging single front driver single rear passenger
Igso 480 with a 4bld powershift
Built by Big Bad Customs "Jason wolf"

mdelaney
Southern Airboat Member
Posts: 170
Joined: Fri Dec 16, 2011 11:07 am
Location: Melbourne, Fl.

Re: Seat covers

Post by mdelaney » Tue Apr 30, 2013 7:25 am

Ronnie Rigsby in West Melbourne. 321 - 288 - 7085

User avatar
air-roberts
Site Supporter - IV
Site Supporter - IV
Posts: 1799
Joined: Sat Jun 27, 2009 8:01 am
Location: cocoa / canaveral groves

Re: Seat covers

Post by air-roberts » Tue Apr 30, 2013 8:01 am

not only look good but the quality of buttraxx is uncomparable mine was the very first airboat seat he did and it still looks brand new and the will never get hard and brittle like the old ones use to after about 2 years out in the sun. and his thread is like comparing sewing thread to kite string.
oh and he ships :thumbleft:

if interested pm me and i'll give you some free coupons
Air-RobertsImage
experimenting with old step w/t experimental 384.8 c.i. nos 2.68 rotator, 80" three bld ? R
http://www.bcraceengineering.com
Thanks to dave http://waterthunder.com/
New & Used PROPs
WhirlWind prop dealer

gso480jr
Southern Airboat Member
Posts: 417
Joined: Fri Apr 08, 2011 10:18 am
Location: spring hill

Re: Seat covers

Post by gso480jr » Tue Apr 30, 2013 8:24 am

Prototype wrote:Lynn's Stitch at 352-341-6213 but she's on vacation this week with family! Invernes area but she is online too.

Tell her you want orange ostrich,,,,,,,,,,,,,,,,,,,,,,, as a joke! She'll probably cut you a deal on anything but?
X2 on Lynn's. can't beat her quality or price, she ships too!

User avatar
KR23
Site Supporter - III
Site Supporter - III
Posts: 1236
Joined: Tue Jun 13, 2006 3:06 pm
Location: none ya

Re: Seat covers

Post by KR23 » Tue Apr 30, 2013 8:29 am

Buttraxxs
"Freedom is never more than one generation away from extinction"

http://www.performanceairboats.com/Home_Page.html (407)349-1209

Warrior AirCraft Engines: (772)260-4235

Kennyjoe
Site Supporter - III
Site Supporter - III
Posts: 136
Joined: Sat May 23, 2009 10:05 am
Location: St.Cloud Fl

Re: Seat covers

Post by Kennyjoe » Tue Apr 30, 2013 10:39 am

Buttraxx I love mine, ordered them on Monday picked up on Friday.
DD supercharged 0-480 13 ft. Lazer 3 blade ngh

Quick Draw
Site Supporter - II
Site Supporter - II
Posts: 605
Joined: Mon Jul 09, 2012 4:31 pm
Location: Plam Beach County

Re: Seat covers

Post by Quick Draw » Tue Apr 30, 2013 10:51 am

Buttraxx :usa:

User avatar
apache220
Site Supporter - II
Site Supporter - II
Posts: 302
Joined: Sun Sep 12, 2010 8:09 pm
Location: chuluota

Re: Seat covers

Post by apache220 » Tue Apr 30, 2013 11:21 am

Buttraxx
13'6" apache with 220
volusia county sportsmans conservation association
MEMBER United Sportsman for Traditional Heritage

User avatar
Tony480
Site Supporter - I
Site Supporter - I
Posts: 5277
Joined: Sun Sep 10, 2006 5:52 pm
Location: lake county

Re: Seat covers

Post by Tony480 » Tue Apr 30, 2013 11:45 am

Buttraxx

Post Reply

Return to “Airboat Tech”