Page 1 of 1

Engine stand setup question

Posted: Wed Aug 28, 2013 10:16 am
by norman simmons
What is a good distance off the edge of the transom to the prop running 12 ft boat with a 180 thanks for the help

Re: Engine stand setup question

Posted: Wed Aug 28, 2013 10:48 am
by diamondback0320
A beer can is what I always told,4-5in

Re: Engine stand setup question

Posted: Wed Aug 28, 2013 11:08 am
by clark-kentski
Mine is about 1.25 in clearance.

Re: Engine stand setup question

Posted: Wed Aug 28, 2013 3:51 pm
by norman simmons
What I need is the distance from the edge of the transom to the prop not clearance height on a full deck

Re: Engine stand setup question

Posted: Wed Aug 28, 2013 4:15 pm
by JAMES
norman simmons wrote:What I need is the distance from the edge of the transom to the prop not clearance height on a full deck
4-5 out /down both ways is std on dd jmo rule of thumb