Poly glow

A general, non-powerplant specific, discussion on airboat technology, ie., hulls, rigging, polymer, etc..
Southern Airboat Member
Posts: 981
Joined: Thu Feb 03, 2005 5:32 pm

Poly glow

Postby mwood7800 » Mon Apr 21, 2014 11:08 am

Has anyone tried poly glow on faded fiberglass?

Site Supporter - I
Site Supporter - I
Posts: 128
Joined: Tue Jan 25, 2011 6:03 pm

Re: Poly glow

Postby Skeeter-Gee » Mon Apr 21, 2014 2:59 pm

Our experience in our shop on your typical boat (i.e cabin, flats etc) application is fine usually goes on good BUT if you have to re-apply removal of the old product is absolutely a p.i.t.a .
Honestly a good compound and wax will bring it back. 3m makes a finishing compound for gelcoat that works like a champ, there is another product called aquabuff as well. Poly glow is an easy bandaid but in no way replaces good ole fashioned elbow grease.

User avatar
Site Supporter - III
Site Supporter - III
Posts: 1096
Joined: Thu Jun 26, 2008 9:42 pm
Location: Paisley

Re: Poly glow

Postby aherr520 » Thu Apr 24, 2014 8:56 pm

DON'T USE THAT STUFF YOU WILL REGRET IT! I detail boats and I have to wetsand that junk off. hope this helps
aaof member

Return to “Airboat Tech”

Who is online

Users browsing this forum: No registered users and 3 guests