slick bottom, frog spit, steelflex. which one?

[cody_spencer]

I just bought a deckover today and Im going to put new slick bottom on it, what should I use and where do I get it from

[kwanjangnihm]

Call Brian at Quick Slick - 863 581 9710

[Bruce]

Call fasco steelflex 2000 is the only way to fly

[fl cracker]

Quickslick, it stuck to my aluminum hull great!

[GeeLeDouche]

Call Brian at Quick Slick - 863 581 9710

+1 for Brian. I don't see how any product could possibly be better than what he has to offer, let alone at the best price out of all of them.

[Big Casino]

Steel Bottom Frog Flex ...

[yobee]

Steel Bottom Frog Flex ...

We been using that over 40 years!

[Scarecrow]

Steel Bottom Frog Flex ...

We been using that over 40 years!

Somebody must have told you that, cause you ain,t but half that old are ya.

[catchment38]

QUICK SLICK< I got proof. Great stuff.

[Stewie]

Quick slick all the way!! We have used them all and by far QUICKSLICK !! is the slickest and most durable!! JMO !!

[wildcard]

YOBEE,you don,t know what an airboat was 40 years ago,you was -3 or4 thin

[Big Casino]

Hell my homiee, YoBmx dont even remember what an Airboat is now!

Laughing with ya' lil Bruddah!!

[Scarecrow]

I heard Yobee uses nothing but "poly butter" on his BMX after all they are his sponsors. :

[newoldglory]

Ask Redeye, he just launched his boat on asphalt at 70 MPH and says that there was not a scratch in the product he used, but the grass rake and willow guard did not do so well in the guard rail. Guess he used his product in the wrong areas.

[yobee]

YOBEE,you don,t know what an airboat was 40 years ago,you was -3 or4 thin

I was -12 haha

[Mudlife81]

What about gator slide

[airboat233]

Call fasco steelflex 2000 is the only way to fly

Have you ever tryed "seaflex"? just as tough as steelflex with more flex

[airboat233]

How about this, fiberglass hull only,,, make your own. Its easy and you can experiment. For a one time application buy it, if you need it slick more often, then make your own. For metal hull Seaflex or Steelflex, my preference would be Seaflex. good luck

[kprince520]

quickslick!!!!

[Locke 632]

I used steelflex and steelflex 2000 on aluminum hulls. Then run frog spit. Now I run quickslick. All on aluminum hulls. Quickslick all the way. RUN THE BEST OR PUSH WITH THE REST.

[Locke 632]

I used steelflex and steelflex 2000 on aluminum hulls. Then run frog spit. Now I run quickslick. All on aluminum hulls. Quickslick all the way. RUN THE BEST OR PUSH WITH THE REST.

[dougeey]

The best stuff I ever put on the bottom was tran. Fluid but it costed to much money when the MAN found out Doug