Rigging help

A general, non-powerplant specific, discussion on airboat technology, ie., hulls, rigging, polymer, etc..
Post Reply
User avatar
LJohnson
Southern Airboat Member
Posts: 54
Joined: Sun Feb 02, 2014 8:44 pm

Rigging help

Post by LJohnson » Sun Jun 08, 2014 6:12 pm

Please post pictures of your boat/boats here so I can see how the foot stand/rigging is built.
I will be re-building mine eventually and want to see a whole bunch of different designs and make one collective design out of what I see. The more pictures the better! Thanks!

Also, the essential question: Pancake or Full guards? I've been seen both but what do you guys think?
220GPU, Big-O Hull

User avatar
Deano
Site Supporter - V
Site Supporter - V
Posts: 4564
Joined: Thu Jan 06, 2005 11:16 am
Location: Inverness, FL

Re: Rigging help

Post by Deano » Sun Jun 08, 2014 8:27 pm

LJohnson wrote: . . . I will be re-building mine eventually and want to see a whole bunch of different designs and make one collective design out of what I see. The more pictures the better! . . .
If you click on Pictures & Wallpapers up on the menu bar, and then go to the Member
Galleries, there are many, many examples of just about any kind of rigging you can imagine.

As far as cage preferences go, here is some reading via the [Search] function:

http://www.southernairboat.com/phpBB3/s ... ll+%2Bcage
"The suppression of uncomfortable ideas may be common in religion and politics,
but it is not the path to knowledge; it has no place in the endeavor of science."
- Carl Sagan

Post Reply

Return to “Airboat Tech”