New Open Hull Design - REVO

A general, non-powerplant specific, discussion on airboat technology, ie., hulls, rigging, polymer, etc..
User avatar
plumcrazy
Site Supporter - V
Site Supporter - V
Posts: 8697
Joined: Thu Apr 06, 2006 10:10 am
Location: avon park

Re: New Open Hull Design - REVO

Post by plumcrazy » Thu Nov 06, 2014 11:25 am

me and Andrew have some ideas time is the thing we cant seem to find

kodiak
Southern Airboat Member
Posts: 91
Joined: Fri Aug 07, 2009 12:12 pm

Re: New Open Hull Design - REVO

Post by kodiak » Mon Nov 24, 2014 12:30 pm

Anybody run one of these bad boys yet?
:florida: Seminole Wind: 14x8 DB/383/Torque Box/3 blade 80" Maximus :florida:

User avatar
DynaMarine
Site Supporter - VIII
Site Supporter - VIII
Posts: 1516
Joined: Sat Oct 02, 2010 8:20 pm
Location: Lawrence, KS
Contact:

Re: New Open Hull Design - REVO

Post by DynaMarine » Tue Nov 25, 2014 9:59 pm

Finishing up a couple of these hulls and putting a 425hp Ecotec on 1, 550hp LS on another and geared AC on another
Shane Lavalette
President/Owner

DynaMarine Performance Boats
785.218.9449
www.dyna-marine.com
shane@dyna-marine.com

User avatar
PAINKILLER
Southern Airboat Member
Posts: 1811
Joined: Sun Apr 22, 2012 5:26 pm
Location: IN THE SOUTH

Re: New Open Hull Design - REVO

Post by PAINKILLER » Tue Nov 25, 2014 10:21 pm

I was wondering today what kind of power it would handle
MATTHEW 25:35-45 LS 406 82 4bld WaterWalker falcon 2.68 ox box
LS 427 80 3 Bld WaterWalker Maximus 2.68 ox box :rebel:

User avatar
DynaMarine
Site Supporter - VIII
Site Supporter - VIII
Posts: 1516
Joined: Sat Oct 02, 2010 8:20 pm
Location: Lawrence, KS
Contact:

Re: New Open Hull Design - REVO

Post by DynaMarine » Wed Nov 26, 2014 10:20 am

PAINKILLER wrote:I was wondering today what kind of power it would handle
No reason it won't handle the same power as any other 14' x 7'6" boat, it's not built paper thin...built to ride :)
Shane Lavalette
President/Owner

DynaMarine Performance Boats
785.218.9449
www.dyna-marine.com
shane@dyna-marine.com

User avatar
ptr34
Site Supporter - II
Site Supporter - II
Posts: 2836
Joined: Wed Oct 04, 2006 5:29 pm
Location: plant city

Re: New Open Hull Design - REVO

Post by ptr34 » Wed Nov 26, 2014 10:24 am

Painkiller he made it for me .lol hill runner baby
if u don't run dry .then should have gotten a bassboat
tons videos on YouTube ptr34

User avatar
PAINKILLER
Southern Airboat Member
Posts: 1811
Joined: Sun Apr 22, 2012 5:26 pm
Location: IN THE SOUTH

Re: New Open Hull Design - REVO

Post by PAINKILLER » Wed Nov 26, 2014 11:12 am

I have no doubt its built well not what im saying id like to see a video of it with that 1500hp motor on it just saying :thumbleft:
Last edited by PAINKILLER on Wed Nov 26, 2014 5:08 pm, edited 2 times in total.
MATTHEW 25:35-45 LS 406 82 4bld WaterWalker falcon 2.68 ox box
LS 427 80 3 Bld WaterWalker Maximus 2.68 ox box :rebel:

User avatar
ptr34
Site Supporter - II
Site Supporter - II
Posts: 2836
Joined: Wed Oct 04, 2006 5:29 pm
Location: plant city

Re: New Open Hull Design - REVO

Post by ptr34 » Wed Nov 26, 2014 11:14 am

Dont need all that power with a efficient hull
if u don't run dry .then should have gotten a bassboat
tons videos on YouTube ptr34

User avatar
PAINKILLER
Southern Airboat Member
Posts: 1811
Joined: Sun Apr 22, 2012 5:26 pm
Location: IN THE SOUTH

Re: New Open Hull Design - REVO

Post by PAINKILLER » Wed Nov 26, 2014 11:18 am

that is very true but i got my reasons not saying why :lol: :lol: :thumbleft: like to see a video of yours also
MATTHEW 25:35-45 LS 406 82 4bld WaterWalker falcon 2.68 ox box
LS 427 80 3 Bld WaterWalker Maximus 2.68 ox box :rebel:

User avatar
PAINKILLER
Southern Airboat Member
Posts: 1811
Joined: Sun Apr 22, 2012 5:26 pm
Location: IN THE SOUTH

Re: New Open Hull Design - REVO

Post by PAINKILLER » Wed Nov 26, 2014 11:19 am

ptr34 wrote:Painkiller he made it for me .lol hill runner baby
:thumbleft: :thumbleft: :thumbleft: :thumbleft: :cheers: :cheers:
MATTHEW 25:35-45 LS 406 82 4bld WaterWalker falcon 2.68 ox box
LS 427 80 3 Bld WaterWalker Maximus 2.68 ox box :rebel:

shootingtheBREEZE
Site Supporter - IV
Site Supporter - IV
Posts: 234
Joined: Mon Nov 14, 2011 6:53 pm
Location: Tarpon Springs/Lake Wales

Re: New Open Hull Design - REVO

Post by shootingtheBREEZE » Wed Nov 26, 2014 12:50 pm

what is suggested retail price on a 12 or 13 ft hull? if you are going to build some smaller hulls.

User avatar
ptr34
Site Supporter - II
Site Supporter - II
Posts: 2836
Joined: Wed Oct 04, 2006 5:29 pm
Location: plant city

Re: New Open Hull Design - REVO

Post by ptr34 » Wed Nov 26, 2014 12:54 pm

3800
if u don't run dry .then should have gotten a bassboat
tons videos on YouTube ptr34

User avatar
ptr34
Site Supporter - II
Site Supporter - II
Posts: 2836
Joined: Wed Oct 04, 2006 5:29 pm
Location: plant city

Re: New Open Hull Design - REVO

Post by ptr34 » Tue Dec 02, 2014 10:54 am

all done :D
Attachments
FullSizeRender_4.jpg
FullSizeRender_3.jpg
FullSizeRender_2.jpg
if u don't run dry .then should have gotten a bassboat
tons videos on YouTube ptr34

User avatar
ptr34
Site Supporter - II
Site Supporter - II
Posts: 2836
Joined: Wed Oct 04, 2006 5:29 pm
Location: plant city

Re: New Open Hull Design - REVO

Post by ptr34 » Tue Dec 02, 2014 10:55 am

its about to get real
Attachments
FullSizeRender_7.jpg
FullSizeRender_6.jpg
FullSizeRender_5.jpg
if u don't run dry .then should have gotten a bassboat
tons videos on YouTube ptr34

User avatar
PAINKILLER
Southern Airboat Member
Posts: 1811
Joined: Sun Apr 22, 2012 5:26 pm
Location: IN THE SOUTH

Re: New Open Hull Design - REVO

Post by PAINKILLER » Tue Dec 02, 2014 11:50 am

ptr34 wrote:its about to get real

:thumbleft:
MATTHEW 25:35-45 LS 406 82 4bld WaterWalker falcon 2.68 ox box
LS 427 80 3 Bld WaterWalker Maximus 2.68 ox box :rebel:

User avatar
DynaMarine
Site Supporter - VIII
Site Supporter - VIII
Posts: 1516
Joined: Sat Oct 02, 2010 8:20 pm
Location: Lawrence, KS
Contact:

Re: New Open Hull Design - REVO

Post by DynaMarine » Wed Dec 03, 2014 11:23 pm

ImageUploadedByTapatalk1417666981.720055.jpg
ImageUploadedByTapatalk1417666969.785299.jpg
ImageUploadedByTapatalk1417666954.684350.jpg
Shane Lavalette
President/Owner

DynaMarine Performance Boats
785.218.9449
www.dyna-marine.com
shane@dyna-marine.com

User avatar
ptr34
Site Supporter - II
Site Supporter - II
Posts: 2836
Joined: Wed Oct 04, 2006 5:29 pm
Location: plant city

Re: New Open Hull Design - REVO

Post by ptr34 » Thu Dec 04, 2014 12:24 am

There's my new baby
if u don't run dry .then should have gotten a bassboat
tons videos on YouTube ptr34

User avatar
ptr34
Site Supporter - II
Site Supporter - II
Posts: 2836
Joined: Wed Oct 04, 2006 5:29 pm
Location: plant city

Re: New Open Hull Design - REVO

Post by ptr34 » Wed Dec 24, 2014 8:52 pm

New Revo is everything I hoped for. Fast, slides yet turns good. Runs same with one person as it does with 4 . Floats awesome and can put 300lbs on side of boat and sides still inches above water. Can't wait to get her painted up
Attachments
IMG_2756.jpg
if u don't run dry .then should have gotten a bassboat
tons videos on YouTube ptr34

User avatar
GeeLeDouche
Southern Airboat Member
Posts: 1015
Joined: Thu Oct 07, 2010 9:02 am
Location: Northern Utah

Re: New Open Hull Design - REVO

Post by GeeLeDouche » Thu Dec 25, 2014 10:43 am

Im impressed with these hulls. I;ve watched some of your videos PTR and I love how it rides in the deep water with a load.
16x8 Utah style hull With a Waterthunder motor W/ 2.3 CH3 reduction swinging a 3 blade 78" R.
&
17-51 Legend craft w/pods pushed by a MB HD7000

Post Reply

Return to “Airboat Tech”