Replacing the deck on a deckover

A general, non-powerplant specific, discussion on airboat technology, ie., hulls, rigging, polymer, etc..
Post Reply
Lnicker1
Southern Airboat Member
Posts: 9
Joined: Sun Apr 28, 2013 11:19 pm

Replacing the deck on a deckover

Post by Lnicker1 »

I have an early 90's 11.5 ft Thurman sled. I currently have most of the deck off because i am replacing the fuel tank and the polymer. Im contemplating having the top re-done as well while I have it apart. Does anybody have an idea of what it might cost to have the deck redone? I would also really like some recommendations on who i can get to replace it (from nose to transom)? Im in Hardee, Desoto, and highlands county. Thanks

User avatar
KR23
Site Supporter - III
Site Supporter - III
Posts: 1236
Joined: Tue Jun 13, 2006 3:06 pm
Location: none ya

Re: Replacing the deck on a deckover

Post by KR23 »

It depends what you want to put on the deck, if it is a thurman it probably had 2024T3 050 or 063. Price the material or call Al at performance airboats. Probably around 1K
"Freedom is never more than one generation away from extinction"

http://www.performanceairboats.com/Home_Page.html (407)349-1209

Warrior AirCraft Engines: (772)260-4235

Lnicker1
Southern Airboat Member
Posts: 9
Joined: Sun Apr 28, 2013 11:19 pm

Re: Replacing the deck on a deckover

Post by Lnicker1 »

Ok sounds good... I appreciate the help!

Post Reply

Return to “Airboat Tech”