Adding a hatch on the boat

A general, non-powerplant specific, discussion on airboat technology, ie., hulls, rigging, polymer, etc..
Southern Airboat Member
Posts: 71
Joined: Sun Nov 13, 2016 7:16 am
Location: St.martinville , Louisiana

Adding a hatch on the boat

Postby Basin_Runner355 » Mon Mar 13, 2017 8:50 am

I'm gonna be adding a hatch on my boat this week just rewired my whole boat new gauges the whole 9 yards what do I need to disconnect since they will be welding and grounding out on my boat just don't want it to fry my wiring and have to do it all over again it was a pain in the ass
14ft diamond back zz4 355sbc 2:1 belt drive reduction with a 78 water walker falcons pitched at 5200

Southern Airboat Member
Posts: 244
Joined: Sun Apr 11, 2010 5:30 am
Location: Palmer, Alaska

Re: Adding a hatch on the boat

Postby bkmail » Mon Mar 13, 2017 1:02 pm

If anything is connected to the boat it might be the ground terminals.
Disconnect the ground terminal from the batt and that should do it.

502 BBC on a 18' Alumitech w/4 blade master blasters, Skip built

Return to “Airboat Tech”

Who is online

Users browsing this forum: No registered users and 1 guest