corvair with the prop lowered 6 inches below top of boat

A general, non-powerplant specific, discussion on airboat technology, ie., hulls, rigging, polymer, etc..
Post Reply
dick2256
Southern Airboat Member
Posts: 310
Joined: Sun Jun 05, 2011 12:25 pm
Location: Carson Iowa

corvair with the prop lowered 6 inches below top of boat

Post by dick2256 »

Airboat pics (4).jpg
engine runs great with new carburetor
Airboat pics (2).jpg
and new rings
got on plane at 1400RPM
Attachments
Airboat pics (5).jpg

dick2256
Southern Airboat Member
Posts: 310
Joined: Sun Jun 05, 2011 12:25 pm
Location: Carson Iowa

Re: corvair with the prop lowered 6 inches below top of boat

Post by dick2256 »

I don't know why they are so big when you click on them

dick2256
Southern Airboat Member
Posts: 310
Joined: Sun Jun 05, 2011 12:25 pm
Location: Carson Iowa

Re: corvair with the prop lowered 6 inches below top of boat

Post by dick2256 »

still trying how to use you tube to post a video
can you tell me again Rick

User avatar
kwanjangnihm
Site Supporter - IV
Site Supporter - IV
Posts: 2031
Joined: Sat Mar 30, 2013 8:23 pm
Location: Bartow FL

Re: corvair with the prop lowered 6 inches below top of boat

Post by kwanjangnihm »

rick wrote: On YouTube.com, click the youtube video's share button and copy the entire uri that it displays. Paste that into the post, highlight & press the "youtube-video" button.

The end result in the posting area will look like this:

Code: Select all

[youtube-video]https://youtu.be/F2mbH5wgZRM[/youtube-video]
Here's the result in the forum from the example above:
If anybody has any problems or questions, let me know.

Thanks,
Rick
He'll cut your throat, baby, stick you in the back, drive off in your Cadillac.
He's more trouble than you think, he'll kill your sugar, leave you in the drink.

dick2256
Southern Airboat Member
Posts: 310
Joined: Sun Jun 05, 2011 12:25 pm
Location: Carson Iowa

Re: corvair with the prop lowered 6 inches below top of boat

Post by dick2256 »

finaly put a set of 4 foot rudders on my corvair but haven't tried it yet
to see if my slow turning is corrected
Attachments
PIC00004.JPG
PIC00002.JPG

Post Reply

Return to “Airboat Tech”