Pitching prop

A general, non-powerplant specific, discussion on airboat technology, ie., hulls, rigging, polymer, etc..
Post Reply
TC66
Southern Airboat Member
Posts: 60
Joined: Fri Jul 05, 2019 10:43 am
Location: Jasper tx

Pitching prop

Post by TC66 »

My 0540 is turning 3100rpms when I stand on it. I am swinging a 2 blade prop and it is set at #1 on the hub marks. Boat runs dry like a beast but not making much top end. Should I adjust prop to reduce Rpms and how many rpms is tolerable?
14'x7' lazer with av0540&72"Q series.
If I can't be at work I might as well slide!! :old_glory: :texas:

User avatar
digginfool
Site Supporter - III
Site Supporter - III
Posts: 2755
Joined: Wed Jun 05, 2013 3:00 pm
Location: South Florida

Re: Pitching prop

Post by digginfool »

Shoot for 2,600 on the trailer. Should give you 2,700 on the water.
“When plunder becomes a way of life for a group of men living together in society, they create for themselves in the course of time a legal system that authorizes it and a moral code that glorifies it” - Bastiat

User avatar
GeeLeDouche
Southern Airboat Member
Posts: 1021
Joined: Thu Oct 07, 2010 9:02 am
Location: Northern Utah

Re: Pitching prop

Post by GeeLeDouche »

agreed with digging.
16x8 Utah style hull With a Waterthunder motor W/ 2.3 CH3 reduction swinging a 3 blade 78" R.
&
17-51 Legend craft w/pods pushed by a MB HD7000

User avatar
John Fenner
Southern Airboat Member
Posts: 2902
Joined: Tue Feb 14, 2012 12:26 pm
Location: Miami(Cuba) Fl.

Re: Pitching prop

Post by John Fenner »

Use the numbers on the blades as a reference, go buy a husky digital level, fine tune the blades with it.
I never finish anyth,,,.

User avatar
Slidin Gator
Site Supporter - IV
Site Supporter - IV
Posts: 995
Joined: Sat Feb 03, 2018 11:33 pm
Location: Jupiter Farms, Florida

Re: Pitching prop

Post by Slidin Gator »

TC66 wrote:
Thu Dec 19, 2019 8:06 am
My 0540 is turning 3100rpms when I stand on it. I am swinging a 2 blade prop and it is set at #1 on the hub marks. Boat runs dry like a beast but not making much top end. Should I adjust prop to reduce Rpms and how many rpms is tolerable?
TC,

It would be useful to have more details, specific prop and hub/diameter. O540 is a carbureted, Parallel Valve (Straight Valve) engine that should make 240-250 Hp with ease. The 3100 figure on #1 pitch is not out of range but you need more pitch. She runs ground well now because she jumps quick.

Assuming you are running a 72" prop, you should increase pitch (Turn down Trailer RPM) tuning for 2,850 RPM Max for optimum performance on ground. For free running on water tune more pitch as Diggin advises towards 2,600 minimum. You should find your happy home in that range.

#2 pitch should be your starting point for running ground, #3 pitch for free running. :thumbleft:
I still think I-10 is the Mason Dixon line.
2013 Mike Stossel Boats, 13' x 7' deck over, IO-540, 74" NGQ less winglets.

Gary S
Site Supporter - I
Site Supporter - I
Posts: 1703
Joined: Wed Mar 03, 2010 3:30 pm
Location: Redlands

Re: Pitching prop

Post by Gary S »

You can also download a level for your phone that is amazingly accurate.

User avatar
Slidin Gator
Site Supporter - IV
Site Supporter - IV
Posts: 995
Joined: Sat Feb 03, 2018 11:33 pm
Location: Jupiter Farms, Florida

Re: Pitching prop

Post by Slidin Gator »

Gary S wrote:
Fri Dec 20, 2019 6:27 am
You can also download a level for your phone that is amazingly accurate.
Isn't that wild!

I'd like to build a 12 inch crescent wrench with a hammer on the back (already got that) plus a cell phone built in.

Built right, the screen won't crack when I drop it...
I still think I-10 is the Mason Dixon line.
2013 Mike Stossel Boats, 13' x 7' deck over, IO-540, 74" NGQ less winglets.

Gary S
Site Supporter - I
Site Supporter - I
Posts: 1703
Joined: Wed Mar 03, 2010 3:30 pm
Location: Redlands

Re: Pitching prop

Post by Gary S »

I bet I could crack it.

TC66
Southern Airboat Member
Posts: 60
Joined: Fri Jul 05, 2019 10:43 am
Location: Jasper tx

Re: Pitching prop

Post by TC66 »

Thanks for input guys! Engine is an av 0540 and yes it's a 72" two blade. Got it to 2600 now and used a piece of stiff wire attached to a valve cover bolt to get it tuned just right. No vibration and super smooth.
14'x7' lazer with av0540&72"Q series.
If I can't be at work I might as well slide!! :old_glory: :texas:

TC66
Southern Airboat Member
Posts: 60
Joined: Fri Jul 05, 2019 10:43 am
Location: Jasper tx

Re: Pitching prop

Post by TC66 »

What is average top speed for a boat that runs dry very well. My boat made 50mph and crosses the sand very good. I run the river and no boat launch. I unload at the top of the river bank then run across the sand to the water. Sometimes big elevation change to get out.
14'x7' lazer with av0540&72"Q series.
If I can't be at work I might as well slide!! :old_glory: :texas:

Gary S
Site Supporter - I
Site Supporter - I
Posts: 1703
Joined: Wed Mar 03, 2010 3:30 pm
Location: Redlands

Re: Pitching prop

Post by Gary S »

Boat runs dry like a beast an runs 50 MPH. What are you looking to get out of it. Lot of people would kill to have what you have.

Post Reply

Return to “Airboat Tech”