Light Rail builder in Texas?

Post Reply
User avatar
RedfireSVT
Southern Airboat Member
Posts: 105
Joined: Sun Dec 16, 2012 4:50 pm
Location: Waco, Texas

Light Rail builder in Texas?

Post by RedfireSVT » Fri Jun 13, 2014 3:49 pm

Looking to install some bowfishing lights and i'm wondering if anyone knows of a place in Texas that can build me a couple of light rails/boxes? I want to put 2 lights on each side and 2 lights in the front. Any suggestions? The closer to Waco the better.
16x8' 2014 Longhorn Custom
6.0L LS Motor
80" 3 Blade Whispertip
Love it!

myronja
Southern Airboat Member
Posts: 568
Joined: Tue Apr 22, 2008 1:21 pm
Location: Mont Belvieu,tx

Re: Light Rail builder in Texas?

Post by myronja » Sat Jun 14, 2014 10:46 am

Lonestar boat works in baytown tx does some nice custom work they will do it how u want it
TAA-436
15' panther 350dd 72"x30 Flordia Paddle 40mph-sold
16X7 Air Ranger 383 stroker 2:1 belt 78" powershift 3/8" poly 58.8mph had to let out

L&L fab
Southern Airboat Member
Posts: 4
Joined: Sun Jul 06, 2014 12:14 am

Re: Light Rail builder in Texas?

Post by L&L fab » Sun Jul 06, 2014 12:32 am

Here is the front rails of a flounder boat I built.
ImageUploadedByTapatalk1404621132.626251.jpg
ImageUploadedByTapatalk1404621155.872785.jpg

User avatar
RedfireSVT
Southern Airboat Member
Posts: 105
Joined: Sun Dec 16, 2012 4:50 pm
Location: Waco, Texas

Re: Light Rail builder in Texas?

Post by RedfireSVT » Tue Jul 15, 2014 4:14 pm

that looks good but i definitely don't want anything that tall. only need it tall enough for the lights. your picture looks like what i'm looking for though.
16x8' 2014 Longhorn Custom
6.0L LS Motor
80" 3 Blade Whispertip
Love it!

L&L fab
Southern Airboat Member
Posts: 4
Joined: Sun Jul 06, 2014 12:14 am

Re: Light Rail builder in Texas?

Post by L&L fab » Tue Jul 15, 2014 10:27 pm

Can build rails the way you want them those are just some I have built.

User avatar
RedfireSVT
Southern Airboat Member
Posts: 105
Joined: Sun Dec 16, 2012 4:50 pm
Location: Waco, Texas

Re: Light Rail builder in Texas?

Post by RedfireSVT » Wed Jul 16, 2014 12:54 am

where are you located?
16x8' 2014 Longhorn Custom
6.0L LS Motor
80" 3 Blade Whispertip
Love it!

L&L fab
Southern Airboat Member
Posts: 4
Joined: Sun Jul 06, 2014 12:14 am

Re: Light Rail builder in Texas?

Post by L&L fab » Wed Jul 16, 2014 8:54 am

We are in Crosby,Tx just east of Houston we do custom fab work from rails,gun boxes,air motor stands,seat brackets in bay boats,aluminum high racks,flounder boats, and trailers. From stainless steel to aluminum we can weld it.

Chaseh
Southern Airboat Member
Posts: 405
Joined: Sat Mar 09, 2013 1:31 pm

Re: Light Rail builder in Texas?

Post by Chaseh » Wed Jul 16, 2014 11:33 am

What are Yall using for lights? And price?

Sent from my SAMSUNG-SGH-I537 using Tapatalk

KC5AKB
Site Supporter - II
Site Supporter - II
Posts: 965
Joined: Sat Jun 27, 2009 12:17 pm
Location: North Texas

Re: Light Rail builder in Texas?

Post by KC5AKB » Wed Jul 16, 2014 3:53 pm

Yea I was wondering the same thing Chase.
BRAB45 RRAB 17

User avatar
RedfireSVT
Southern Airboat Member
Posts: 105
Joined: Sun Dec 16, 2012 4:50 pm
Location: Waco, Texas

Re: Light Rail builder in Texas?

Post by RedfireSVT » Wed Jul 16, 2014 3:57 pm

i have a light rail i will sell ya chase, i think it just might fit your boat. :D
16x8' 2014 Longhorn Custom
6.0L LS Motor
80" 3 Blade Whispertip
Love it!

Chaseh
Southern Airboat Member
Posts: 405
Joined: Sat Mar 09, 2013 1:31 pm

Re: Light Rail builder in Texas?

Post by Chaseh » Wed Jul 16, 2014 7:17 pm

Haha. A$$hole.


So how much you want for it?

Sent from my SAMSUNG-SGH-I537 using Tapatalk

L&L fab
Southern Airboat Member
Posts: 4
Joined: Sun Jul 06, 2014 12:14 am

Re: Light Rail builder in Texas?

Post by L&L fab » Wed Jul 16, 2014 7:52 pm

The lights in the picture are 12 volt halogens each fixture has 2 100 watt bulbs. It is on a flounder boat and has a alternator to charge the batteries.

User avatar
RedfireSVT
Southern Airboat Member
Posts: 105
Joined: Sun Dec 16, 2012 4:50 pm
Location: Waco, Texas

Re: Light Rail builder in Texas?

Post by RedfireSVT » Wed Jul 16, 2014 8:54 pm

oh unless i use it to build my new one you can have it, i'm not gonna use it otherwise.
16x8' 2014 Longhorn Custom
6.0L LS Motor
80" 3 Blade Whispertip
Love it!

User avatar
FlatsFisher
Site Supporter - II
Site Supporter - II
Posts: 236
Joined: Sat Feb 23, 2013 2:11 pm
Location: Central Coast of Texas

Re: Light Rail builder in Texas?

Post by FlatsFisher » Sun Jul 20, 2014 9:27 am

If you can draw it a welding shop can build it.

Check around Waco, and you may even find a shop that's willing to trade for a bowfishing trip, or an airboat ride.

Post Reply

Return to “Texas Airboaters”