Page 1 of 1

Putting propellers back on.

Posted: Sun Jan 31, 2016 8:55 pm
by wal1809
At minute 4:40 what is this guy doing. I am,going back with my props and I am at this stage right now. No clue what he is doing though.

https://youtu.be/iNIfu7bkd2E

Re: Putting propellers back on.

Posted: Sun Jan 31, 2016 9:11 pm
by nomad41
DON'T DO ANYTHING THAT IDIOT IS DOING.

Re: Putting propellers back on.

Posted: Sun Jan 31, 2016 9:32 pm
by diesel250rr
Just to help he is degreeing or angling the prop from what I can tell rather then just using the marks on the prop also when the guys said don't do anything this guy is doing I think he is referring to don't use and impact but u only skipped to the 440 mark

Re: Putting propellers back on.

Posted: Sun Jan 31, 2016 9:34 pm
by diesel250rr
Edit I only skipped to the 440 mark and that's not a level it's an angle finder I'm pretty sure

Re: Putting propellers back on.

Posted: Sun Jan 31, 2016 9:43 pm
by wal1809
So be it I used a red sharpy pen to mark the position of the blades, I don't have to use that thing, correct.

Also was I supposed to use red threadlocker on the 7 bolts inside the gear reduction unit? The ones bolting it to the rear of the engine.

Re: Putting propellers back on.

Posted: Sun Jan 31, 2016 11:05 pm
by diesel250rr
Don't know that part just saying ehat I saw in the video so you could keep going on your assembly

Re: Putting propellers back on.

Posted: Sun Jan 31, 2016 11:40 pm
by Bdriller
So impact ranem to 175 torque wrench only showed that they were more than 80

Re: Putting propellers back on.

Posted: Mon Feb 01, 2016 12:32 am
by wal1809
Thank you guys. I got her back together. I will fire it up in the morning. I need a clear head and clear vision to do that. Right now I have neither.

Re: Putting propellers back on.

Posted: Mon Feb 01, 2016 2:56 pm
by wal1809