ANGLE VALVE 0-200 HORSEPOWER?

Aircraft powered airboat discussion.
User avatar
SWAMPCRACKER
Southern Airboat Member
Posts: 227
Joined: Mon May 12, 2008 10:33 pm

ANGLE VALVE 0-200 HORSEPOWER?

Post by SWAMPCRACKER » Wed Dec 02, 2009 5:21 pm

WOULD ANY OF YALL KNOW THE APPROXIMATE HORSE POWER THAT AN O-200 ANGLE VALVE PRODUCES? AND HOW DO THEY PERFORM ON LIKE A 12-13'X7" GLASS BOAT WITH A 2 SEAT SET UP AND WHAT WOULD BE A GOOD PROP SETUP FOR ONE?WARP DRIVE,WOOD,2-3 BLADE COMPOSITE ??? JUST TRYING TO GATHER SOME INFO BECAUSE I'VE BEEN THINKING OF BUYING ONE OR BUILDING ONE BECAUSE MY GRANDFATHER HAD ONE AND THAT THING WAS A BEAST...AND WOULD ANONE KNOW WHAT PRICE RANGE THESE MOTORS GO FOR AND IF THEY'RE AS RELIABLE AS I THINK THEY ARE ANY PROBLEMS WITH THESE MOTORS?ANY HELP WOULD BE APPRECIATED...THANKS...~RONNIE~
~ WAY DOWN SOUTH IN THE EVERGLADES ~
~ WHERE THE BLACK WATER ROLLS AND THE SAWGRASS WAVES ~

User avatar
T. Gaffney
Site Supporter - V
Site Supporter - V
Posts: 727
Joined: Tue Apr 28, 2009 11:16 pm
Location: Central Florida

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by T. Gaffney » Wed Dec 02, 2009 5:32 pm

Do yo mean a angle valve 0-360 200 H.P.? The reason I ask is because you're talking about a 12'-13' hull. Kind of big...

User avatar
SWAMPCRACKER
Southern Airboat Member
Posts: 227
Joined: Mon May 12, 2008 10:33 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by SWAMPCRACKER » Wed Dec 02, 2009 5:36 pm

I GUESS... IS THAT WHAT AN ANGLE VALVE IS CONSIDERED AN 0-360 ??? IF SO THEN YES THATS WHAT I'M TALKING ABOUT...I NEVER KNEW WHAT THE MOTOR SPEC WAS I JUST FIGURED 0-200...IF ITS AN 0-360 THAT I'M TALKING ABOUT ARE THEY DECENT MOTORS???
~ WAY DOWN SOUTH IN THE EVERGLADES ~
~ WHERE THE BLACK WATER ROLLS AND THE SAWGRASS WAVES ~

User avatar
SWAMPCRACKER
Southern Airboat Member
Posts: 227
Joined: Mon May 12, 2008 10:33 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by SWAMPCRACKER » Wed Dec 02, 2009 5:38 pm

THE REASON I ASKED IS BECAUSE MY GRAND FATHER SAID THE MOTOR HE HAD WAS AN ANGLE VALVE 200 LYCOMING AND HAD IT ON A 11X7 TAYLOR HULL WITH A WOOD PROP AND I REMEMBER THAT THING BEING A BEAST WHEN I USE TO RIDE WITH HIM WHEN I WAS YOUNGER...
~ WAY DOWN SOUTH IN THE EVERGLADES ~
~ WHERE THE BLACK WATER ROLLS AND THE SAWGRASS WAVES ~

User avatar
SWAMPCRACKER
Southern Airboat Member
Posts: 227
Joined: Mon May 12, 2008 10:33 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by SWAMPCRACKER » Wed Dec 02, 2009 5:44 pm

I'M REALLY JUST TRYING TO FIGURE OUT WHAT MOTOR BE IT A 4-6 CYLINDER LYCOMING WOULD BE THE BEST PERFORMING ON A 12-13' GLASS BOAT AND WHAT MOTOR WOULD BE THE CHEAPEST,FUEL EFFICIENT AND HAVE PLENTY OF POWER TO PUSH 2-3 PEOPLE AND STILL BE CHEAP ON THE WALLET...AND WHAT PROP WOULD WORK THE BEST FOR IT ??? I WOULD EVEN DO GPU'S ARE 0-470'S GOOD MOTORS? SOMEONE TOLD ME THEY PRODUCE 220 HP IS THAT CORRECT?
~ WAY DOWN SOUTH IN THE EVERGLADES ~
~ WHERE THE BLACK WATER ROLLS AND THE SAWGRASS WAVES ~

User avatar
T. Gaffney
Site Supporter - V
Site Supporter - V
Posts: 727
Joined: Tue Apr 28, 2009 11:16 pm
Location: Central Florida

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by T. Gaffney » Wed Dec 02, 2009 5:46 pm

In my opinion, it's one of the best if not the best A/C engine you can run. Just keep it on the right size hull and don't load it down too much. I wouldn't go over 12'. If you want to feel an awesome boat, put it on a 10'-11' boat with your back against the mags. If someone wants to ride, put them on the foot stand. That engine will last forever on a light, little boat.

User avatar
T. Gaffney
Site Supporter - V
Site Supporter - V
Posts: 727
Joined: Tue Apr 28, 2009 11:16 pm
Location: Central Florida

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by T. Gaffney » Wed Dec 02, 2009 5:53 pm

SWAMPCRACKER wrote:I'M REALLY JUST TRYING TO FIGURE OUT WHAT MOTOR BE IT A 4-6 CYLINDER LYCOMING WOULD BE THE BEST PERFORMING ON A 12-13' GLASS BOAT AND WHAT MOTOR WOULD BE THE CHEAPEST,FUEL EFFICIENT AND HAVE PLENTY OF POWER TO PUSH 2-3 PEOPLE AND STILL BE CHEAP ON THE WALLET...AND WHAT PROP WOULD WORK THE BEST FOR IT ??? I WOULD EVEN DO GPU'S ARE 0-470'S GOOD MOTORS? SOMEONE TOLD ME THEY PRODUCE 220 HP IS THAT CORRECT?
Personally, I would put a six cylinder on a 12'-13' boat. You can get away with the 0360 but to me, you're wasting the engine on a hull that big...
Nothing wrong with the 0470/220h.p. GPU's. Definitely a difference in price!

User avatar
SWAMPCRACKER
Southern Airboat Member
Posts: 227
Joined: Mon May 12, 2008 10:33 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by SWAMPCRACKER » Wed Dec 02, 2009 5:58 pm

YEA I HEARD THEY'RE GREAT MOTORS...SO BASICALLY GO WITH A 12' AND MAKE IT A REAR DRIVER, I WOULD HAVE TO MAKE IT A 2 SEATER FOR THE OL' LADY TO RIDE ON SO A FRONT PASSENGER REAR DRIVER...DO YOU HAVE ANY PROP SUGGESTIONS THAT WOULD WORK BEST FOR AN 0360 I WONDER HOW A 2 BLADE WHISPER TIP OR A 5 BLADE WARP DRIVE WOULD WORKOUT ON ONE...
~ WAY DOWN SOUTH IN THE EVERGLADES ~
~ WHERE THE BLACK WATER ROLLS AND THE SAWGRASS WAVES ~

User avatar
SWAMPCRACKER
Southern Airboat Member
Posts: 227
Joined: Mon May 12, 2008 10:33 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by SWAMPCRACKER » Wed Dec 02, 2009 6:05 pm

I'M JUST TRYING TO FIND THE CHEAPEST,EFFICIENT SETUP TO RUN THAT I WOULD ENJOY AND NOT HAVE TO WORK ON EVERYTIME I TAKE IT OUT...I DON'T NEED TO DO A 100 MPH BUT I WOULD LIKE TO HAVE SOME FUN AND THE POWER TO DO SO...MY STEPDAD HAD AN 0470 ON HIS 13X7 COTTONMOUTH WITH A 5 BLADE WARP DRIVE WITH A SINGLE REAR DRIVER AND DOUBLE FRONT PASSENGER AND IT WAS A PRETTY DESCENT RUNNING BOAT...I MAY JUST DO A SETUP LIKE THAT FOR MYSELF...I'M WANTING TO BUY A BOAT ASAP SINCE I DON'T HAVE ONE NOW AND I'M TIRED OF RIDING ON OTHER PEOPLES BOATS OR NOT BEING ABLE TO GO OUT AT ALL...AT ONE TIME I WAS THINKING ABOUT BUYING A DD 350 BOAT BUT I'VE HEARD TO MANY HORROR STORIES ABOUT THOSE SETUPS...I JUST WANT SOMETHING SIMPLE AND THATS RELIABLE
~ WAY DOWN SOUTH IN THE EVERGLADES ~
~ WHERE THE BLACK WATER ROLLS AND THE SAWGRASS WAVES ~

User avatar
hogdoggin
Site Supporter - III
Site Supporter - III
Posts: 579
Joined: Mon Sep 24, 2007 3:56 pm
Location: Chuluota FL

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by hogdoggin » Wed Dec 02, 2009 6:16 pm

SwampCracker if you look in my pics at my boat it has a 0360 on it i had the motor on two 12' Aluimtech hulls it ran good on both of those and now i have it on a 11' 3/4 deck boat and it runs the hill awesome. The best thing about it is I can run all day and still come home with gas in the tank.

User avatar
SWAMPCRACKER
Southern Airboat Member
Posts: 227
Joined: Mon May 12, 2008 10:33 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by SWAMPCRACKER » Wed Dec 02, 2009 6:31 pm

THATS WHAT I'M TALKING ABOUT !!! :P I WOULD LOVE TO RUN HARD ALL DAY WITH FUEL LEFT IN THE TANK WHEN I GET HOME... MY DECISION WILL BE BETWEEN BOTH THE 0-360 AND OR THE 0-470 ON LIKE A 12'X13'X7" COTTON MOUTH,RIVER MASTER,GILILEO,BANDIT HULL...WITH A 5 BLADE WARP DRIVE OR A 2 BLADE WHISPER TIP OR 2 BLADE WHIRL WIND...I LIKE GLASS BOATS BECAUSE THEY'RE GREAT IN ALL WATER DEPTHS THEY SLIDE GREAT AND IF I PUNCH A HOLE IN IT I CAN PATCH IT RITE UP DEPENDING ON HOW SEVERE IT IS..
~ WAY DOWN SOUTH IN THE EVERGLADES ~
~ WHERE THE BLACK WATER ROLLS AND THE SAWGRASS WAVES ~

User avatar
SWAMPCRACKER
Southern Airboat Member
Posts: 227
Joined: Mon May 12, 2008 10:33 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by SWAMPCRACKER » Wed Dec 02, 2009 6:45 pm

Hey " HOGDOGGING " That new boat of yours did you happen to buy it from guy named Keith from Ft.Lauderdale, The hull looks exactly like my old one that i sold him...When i sold it to him it was a non painted aluminum hull on a bright orange trailer with black carpeted boards...Just wondering if thats the boat or not...
~ WAY DOWN SOUTH IN THE EVERGLADES ~
~ WHERE THE BLACK WATER ROLLS AND THE SAWGRASS WAVES ~

boobidges
Southern Airboat Member
Posts: 495
Joined: Sat Sep 29, 2007 5:06 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by boobidges » Wed Dec 02, 2009 6:49 pm

thats probly the best -bang for your buck all around setup you're gonna get(0-470/cotton mouth)

User avatar
Bucknasty
Southern Airboat Member
Posts: 564
Joined: Sat Jul 18, 2009 11:25 am

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by Bucknasty » Wed Dec 02, 2009 6:59 pm

I think for the money, a good GPU220 on a 12ft White hull would do everything you want. It would be one of your cheaper options.
" I'm a bird watcher and I'm looking for a Big Breasted Bed Thrasher: have you seen one? "

User avatar
MYDIXIEWRECKED
Site Supporter - IV
Site Supporter - IV
Posts: 3634
Joined: Tue Dec 18, 2007 7:48 am
Location: Plantation,fl Area 3A south camp 9 1/2

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by MYDIXIEWRECKED » Thu Dec 03, 2009 2:21 pm

Ronnie, I ran a boat with a 200 for years. I first had it on a bill vaugh 10' full deck. Ran awesome. Then I got a 12' wilcox step boat(with the 200). That was by far the funnest/fastest little boat I ever owned! Wish I still had it but I can't tote the whole fam damily with that so I had to go to the dark side...
THOUGHT FOR THE DAY
"People sleep peaceably in their beds only because rough men stand ready to do violence ON THEIR BEHALF"

Lifetime member NRA
Owner camp 9 1/2 in beautiful 3A south, Everglades

User avatar
Whitebear
Site Supporter - VIII
Site Supporter - VIII
Posts: 16554
Joined: Thu Jan 05, 2006 7:49 pm
Location: Palm Bay, Fl
Contact:

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by Whitebear » Thu Dec 03, 2009 2:55 pm

SWAMPCRACKER wrote:WOULD ANY OF YALL KNOW THE APPROXIMATE HORSE POWER THAT AN O-200 ANGLE VALVE PRODUCES? AND HOW DO THEY PERFORM ON LIKE A 12-13'X7" GLASS BOAT WITH A 2 SEAT SET UP AND WHAT WOULD BE A GOOD PROP SETUP FOR ONE?WARP DRIVE,WOOD,2-3 BLADE COMPOSITE ??? JUST TRYING TO GATHER SOME INFO BECAUSE I'VE BEEN THINKING OF BUYING ONE OR BUILDING ONE BECAUSE MY GRANDFATHER HAD ONE AND THAT THING WAS A BEAST...AND WOULD ANONE KNOW WHAT PRICE RANGE THESE MOTORS GO FOR AND IF THEY'RE AS RELIABLE AS I THINK THEY ARE ANY PROBLEMS WITH THESE MOTORS?ANY HELP WOULD BE APPRECIATED...THANKS...~RONNIE~
An O-200 is 100 HP I think.
"The Constitution is not so the government can restrain the people, it is so the people can restrain the government." Patrick Henry
The government cannot give anything --
that they have not first taken from someone else.

User avatar
MYDIXIEWRECKED
Site Supporter - IV
Site Supporter - IV
Posts: 3634
Joined: Tue Dec 18, 2007 7:48 am
Location: Plantation,fl Area 3A south camp 9 1/2

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by MYDIXIEWRECKED » Thu Dec 03, 2009 3:00 pm

Your right Bear. A O-200 is definately a 100 hp engine. Ronnie is talking about an O-360 for sure. He just explained it a little off. I have never seen an O-200 angle valve. If they make any cylinders like that I want 4 for my sons O-200 I have in the shed for his first boat! :D :D
THOUGHT FOR THE DAY
"People sleep peaceably in their beds only because rough men stand ready to do violence ON THEIR BEHALF"

Lifetime member NRA
Owner camp 9 1/2 in beautiful 3A south, Everglades

User avatar
SWAMPCRACKER
Southern Airboat Member
Posts: 227
Joined: Mon May 12, 2008 10:33 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by SWAMPCRACKER » Thu Dec 03, 2009 4:10 pm

Hey Chester, what motor does your Dad run on his boat ? is it an 0-360? and is that what an angle valve is considered? Maybe you could help me but do you remember what motor my Grandfather " MIKE VOSTAL " Had on his boat? " RAT RACE REMEDIES " I'm starting to think it was an 0-360 but I may be wrong...I know an 0-360 would be to small for like a 12-13'x7 cotton mouth hull which is what i would want for my next boat...I was thinking of going with a c/m but i dont want to have to work on it all the time not saying they suck but I would lose my patience after a couple times of fixing them...So I'm just gonna go with a/c or gpu like an 0-470 and I think I would enjoy it a little more and maybe slap a 5 blade warp drive pitched out or a 2 blade whirl wind or whisper tip and see how it runs like that...
~ WAY DOWN SOUTH IN THE EVERGLADES ~
~ WHERE THE BLACK WATER ROLLS AND THE SAWGRASS WAVES ~

Muddyduck
Site Supporter - II
Site Supporter - II
Posts: 679
Joined: Thu Apr 14, 2005 12:16 pm
Location: Sunrise, FL

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by Muddyduck » Thu Dec 03, 2009 4:25 pm

http://www.southernairboat.com/classifi ... duct=13500

buy this step hull in the classifieds and hang on for the ride.
Many could live on what we have wasted.

User avatar
SWAMPCRACKER
Southern Airboat Member
Posts: 227
Joined: Mon May 12, 2008 10:33 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by SWAMPCRACKER » Thu Dec 03, 2009 4:38 pm

Haha yea right I wish if I had $ 14,500 for a boat then maybe...But I would be answering to the ol' lady after that...I would end up killing myself on that thing :wink:
~ WAY DOWN SOUTH IN THE EVERGLADES ~
~ WHERE THE BLACK WATER ROLLS AND THE SAWGRASS WAVES ~

Bushman
Southern Airboat Member
Posts: 68
Joined: Mon Jan 19, 2009 4:40 pm
Location: West Melbourne, Fla

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by Bushman » Thu Dec 03, 2009 6:39 pm

0-360 200hp on a 12 ft Hammant hull would be super sweet. These hulls run so free in the water and run the hill great also. Around $3,500 for the hull, this price is my best guess! You wouldn't be disappointed!
"When in doubt tach it out"

Glenn P Barrett
Southern Airboat Member
Posts: 27
Joined: Sat Oct 24, 2009 2:26 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by Glenn P Barrett » Thu Dec 03, 2009 6:58 pm

i run a 200 angle valve on a 12" Gilileo. It goes anywhere i point it. Brand new hull is $2000.

User avatar
Waggs
Site Supporter - II
Site Supporter - II
Posts: 899
Joined: Mon Jul 21, 2008 5:50 pm
Location: Clermont, FL

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by Waggs » Thu Dec 03, 2009 7:55 pm

I'm plannin on puttin O-360 on a 11.5 predator for my next one. My O-320 on my boat goes anywhere. Before I get a O-360 Ima put my 320 on a pred.
12.5' Predator, O320H2AD, 72" Whisper Tip Narrow

Liberty Mechanical Services
Performing all commercial and residential HVAC services
321-689-7709
Making America Cool Again!

KCCO

0360Dominator
Southern Airboat Member
Posts: 267
Joined: Sun Jul 22, 2007 1:58 pm
Location: fort lauderdale

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by 0360Dominator » Thu Dec 03, 2009 10:25 pm

chesters dads boat is a 0470 contential 220 horse but its an aircraft not gpu. and my dad had a 0360 180 hp on a 13 foot bandit hull and it ran just fine ran the dry and everything best thing we ever did to that boat was put a sensnich q series on it
injected angle valve 200 on an 11x7 diamondback with a 2 blade q series

User avatar
SWAMPCRACKER
Southern Airboat Member
Posts: 227
Joined: Mon May 12, 2008 10:33 pm

Re: ANGLE VALVE 0-200 HORSEPOWER?

Post by SWAMPCRACKER » Fri Dec 04, 2009 1:34 am

Here's a drawing of what i would like my next boat to look like...a 13'x7' Cotton Mouth with an 0-470 and a 2 blade whisper tip series prop...Sooner or later i'll have something like this in the near future out in the woods...keep an eye out for it...Hope yall like my idea...~Ronnie~
Attachments
MY BOAT FINISHED 2.JPG
MY BOAT FINISHED 2.JPG (61.93 KiB) Viewed 1092 times
~ WAY DOWN SOUTH IN THE EVERGLADES ~
~ WHERE THE BLACK WATER ROLLS AND THE SAWGRASS WAVES ~

Post Reply

Return to “Aircraft Power Only”