belt

A general, non-powerplant specific, discussion on airboat technology, ie., hulls, rigging, polymer, etc..
Tees1tee
Southern Airboat Member
Posts: 1
Joined: Sat Mar 24, 2018 10:14 am

belt

Postby Tees1tee » Sat Mar 24, 2018 11:30 am

what size belt would i need for this drive.can not read the numbers on old belt

User avatar
Junker
Site Supporter - IV
Site Supporter - IV
Posts: 373
Joined: Mon Apr 25, 2011 10:11 pm
Location: Lake Co,FL

Re: belt

Postby Junker » Sun Mar 25, 2018 10:37 pm

Without additional info ................ I use a 52" belt for my 46" waist........ purchased from Duluth Trading Co.
14 x 8 Hamant
383 - 2.38 Stinger
80" 3 Blade
Stainless rigged

Gary S
Site Supporter - I
Site Supporter - I
Posts: 1465
Joined: Wed Mar 03, 2010 3:30 pm
Location: Redlands

Re: belt

Postby Gary S » Mon Mar 26, 2018 7:34 am

I use suspenders, got them at northern tool.

User avatar
skinnypockets
Site Supporter - IV
Site Supporter - IV
Posts: 963
Joined: Mon Oct 18, 2010 8:12 am
Location: St Cloud, Fl

Re: belt

Postby skinnypockets » Mon Mar 26, 2018 8:05 am

I use a 3" x 24" ,60 grit from Home-Depot on my belt sander. :stirpot:

:rebel: :florida: :old_glory:
I'VE DONE SO MUCH WITH SO LITTLE FOR SO LONG, I CAN DO ANYTHING WITH NOTHING!

13.6 Alumitec, 350 Chevy, Rotator Gearbox and 6 Blade Warp Drive

User avatar
kwanjangnihm
Site Supporter - IV
Site Supporter - IV
Posts: 1652
Joined: Sat Mar 30, 2013 8:23 pm
Location: Bartow FL

Re: belt

Postby kwanjangnihm » Mon Mar 26, 2018 8:54 am

Image
" I don't care who you are back in the world, you give away our position one more time, I'll bleed ya, real quiet. Leave ya here. Got that? "

User avatar
skinnypockets
Site Supporter - IV
Site Supporter - IV
Posts: 963
Joined: Mon Oct 18, 2010 8:12 am
Location: St Cloud, Fl

Re: belt

Postby skinnypockets » Mon Mar 26, 2018 3:23 pm

:cheers:
Last edited by skinnypockets on Mon Mar 26, 2018 3:27 pm, edited 1 time in total.
I'VE DONE SO MUCH WITH SO LITTLE FOR SO LONG, I CAN DO ANYTHING WITH NOTHING!

13.6 Alumitec, 350 Chevy, Rotator Gearbox and 6 Blade Warp Drive

User avatar
skinnypockets
Site Supporter - IV
Site Supporter - IV
Posts: 963
Joined: Mon Oct 18, 2010 8:12 am
Location: St Cloud, Fl

Re: belt

Postby skinnypockets » Mon Mar 26, 2018 3:24 pm

skinnypockets wrote:I like kwanjangnihm's belt best! :drunken: :drunken:
Do they come in Miller Light size?

:rebel: :florida: :old_glory:
I'VE DONE SO MUCH WITH SO LITTLE FOR SO LONG, I CAN DO ANYTHING WITH NOTHING!

13.6 Alumitec, 350 Chevy, Rotator Gearbox and 6 Blade Warp Drive

pierson skunkape
Site Supporter - II
Site Supporter - II
Posts: 77
Joined: Wed Sep 04, 2013 1:11 pm

Re: belt

Postby pierson skunkape » Tue Mar 27, 2018 9:33 am

kind of rough for your first post a fella... a little thicker skin and everyone on here is very informative but you have to have something to go on which you have nothing as far as information... count the teeth on both pullies, call the mfgr... :slap: :rebel:

User avatar
kwanjangnihm
Site Supporter - IV
Site Supporter - IV
Posts: 1652
Joined: Sat Mar 30, 2013 8:23 pm
Location: Bartow FL

Re: belt

Postby kwanjangnihm » Tue Mar 27, 2018 12:18 pm

he was last active: Sat Mar 24, 2018 7:55 pm
" I don't care who you are back in the world, you give away our position one more time, I'll bleed ya, real quiet. Leave ya here. Got that? "

daxxe
Southern Airboat Member
Posts: 13
Joined: Thu Apr 12, 2018 12:30 am

Re: belt

Postby daxxe » Fri Apr 13, 2018 1:20 am

Junker wrote:Without additional info ................ I use a 52" belt for my 46" waist........ purchased from Duluth Trading Co.


Duluth trading co. seems got a good line of products.


Return to “Airboat Tech”

Who is online

Users browsing this forum: No registered users and 4 guests