5 blade 60in warp drive on pe90

Airboat propeller discussion.
Post Reply
Perryweeks
Southern Airboat Member
Posts: 3
Joined: Tue Jul 02, 2019 5:46 am

5 blade 60in warp drive on pe90

Post by Perryweeks » Mon Jul 08, 2019 12:27 pm

What is the best pitch to set the blades at I have a 60/41 wood prop as of right now going to pick up the warp drive after work today. Also is 60 to short? My wood prop let's me run dry no problem would it be better? The same? Also I'm in lake county florida

The pe90 is bored .15 over also

Hambone79
Site Supporter - II
Site Supporter - II
Posts: 286
Joined: Sun Oct 24, 2010 9:07 pm
Location: Plant City , Fl

Re: 5 blade 60in warp drive on pe90

Post by Hambone79 » Thu Jul 11, 2019 4:18 pm

I am running a PE90 but it has the 520 cyl on it. I have a 67" 5 blade on it pitched at 8 deg. mine runs dry really well. extremely snappy.

as far as the difference in prop you will probably loose some low end push. but the snap of the warp is great just have to feed it more throttle. your speed will pick up a bit though.

Post Reply

Return to “Prop Talk”