Not happy about hull!!

Post Reply
TC66
Southern Airboat Member
Posts: 20
Joined: Fri Jul 05, 2019 10:43 am
Location: Jasper tx

Not happy about hull!!

Post by TC66 » Thu Aug 08, 2019 8:05 pm

Just bought first airboat and I found a broken rib in the bottom of the hull. It's just forward of the front rigging mount on the right side.
Hull is a light laser hull and sides are flimsy. Has anyone fixed one of these hulls? Any ideas!!

unforgiven11B
Site Supporter - IV
Site Supporter - IV
Posts: 549
Joined: Sat May 26, 2012 9:59 am

Re: Not happy about hull!!

Post by unforgiven11B » Thu Aug 08, 2019 8:41 pm

That’s a called a stringer, depending on how bad it is will determine work involved. Hit the search on the forum for stringer repair or hull work and you’ll find plenty of information to fix it or information on where or who to take it too to have it done right.

SWAMPHUNTER45
Site Supporter - III
Site Supporter - III
Posts: 2851
Joined: Thu Nov 21, 2013 11:38 am
Location: Naturecoast, Florida

Re: Not happy about hull!!

Post by SWAMPHUNTER45 » Sun Aug 11, 2019 10:12 am

I would recommend you take it to someone who has repaired airboat hulls before. The front tabs of your rigging experience a lot of stress. They will want to determine why the stringer failed such as was it from stress, impact or wood rot.

A lighter boat has more flex than a stiff heavy boat. They tend to run dry real well but cracks at stiffeners and stringers can be troublesome if the boat gets used rough.

Wood rot is another real common problem and can happen quick if bolts holding the rigging on are not given a little 5200 type sealer to keep moisture out. If someone has drilled holes and moved rigging around and not resealed the holes that will get rot really fast.

Hope this helps explain things.

Post Reply

Return to “Texas Airboaters”