DELRIN ROD
DELRIN ROD
Anyone know where I can buy 3 inch Delrin rod near Okeechobee, Fl
-
FISHSTICKER
- Southern Airboat Member
- Posts: 395
- Joined: Wed Aug 31, 2016 11:22 am
- Location: French Settlement Louisiana
Re: DELRIN ROD
Just bought some off EBAY.
-
terrible ted
- Southern Airboat Member
- Posts: 2885
- Joined: Tue Aug 12, 2008 8:07 pm
- Location: orlando
Re: DELRIN ROD
Did you try McmasterCarr
-
terrible ted
- Southern Airboat Member
- Posts: 2885
- Joined: Tue Aug 12, 2008 8:07 pm
- Location: orlando
Re: DELRIN ROD
Acetal is the material name Delrin is acetal made by DuPont
https://www.mcmaster.com/acetal/wear-re ... ngth~5ft-/
https://www.mcmaster.com/acetal/wear-re ... ngth~5ft-/
Re: DELRIN ROD
No, but I will check, Thanks.
Re: DELRIN ROD
didn't try McmasterCarr but will check with them if someone can give me an Idea as to where they are for I have never heard of them. thanks
Re: DELRIN ROD
Oh, And I had already found it on ebay and amazon but hoped to find it in the area if it wasn't too much higher than ebay. thanks again
-
terrible ted
- Southern Airboat Member
- Posts: 2885
- Joined: Tue Aug 12, 2008 8:07 pm
- Location: orlando
Re: DELRIN ROD
Thanks, Guys
-
kwanjangnihm
- Site Supporter - IV
- Posts: 2154
- Joined: Sat Mar 30, 2013 8:23 pm
- Location: Bartow FL
Re: DELRIN ROD
OK I will ask - what are you using the rods for??
He'll cut your throat, baby, stick you in the back, drive off in your Cadillac.
He's more trouble than you think, he'll kill your sugar, leave you in the drink.
He's more trouble than you think, he'll kill your sugar, leave you in the drink.
Re: DELRIN ROD
I'm using it to make bushings for a lawn mower, and machining a couple Idler pulley's for the drive pumps which have a bearing pressed into each of them.