Look at these gig heads.....
http://www.ebay.com/itm/No-Mytth-EZGIG- ... SweW5VUMhN
Gig Heads
-
diamondback0320
- Southern Airboat Member
- Posts: 1334
- Joined: Thu Aug 20, 2009 3:09 pm
- Location: palm bay,fl
Re: Gig Heads
Hmm..those are pretty nice
-
Bob1120
- Site Supporter - I
- Posts: 41
- Joined: Tue Feb 21, 2012 6:59 pm
- Location: Southwest Ranches
- Contact:
Re: Gig Heads
Cowboy those gigs head are really nice. I had broken my gig pole while frogging and lost the head. I started looking on the web for a new one and decided to make my own but just can't justify spending that much on a gig head. I'm to cheap I guess. Made one out of 1/2 conduit and number 7 mustads. They worked great made an extra. I'm going to try and attach a photo.
- Attachments
-
-
rjonesboy
- Site Supporter - IV
- Posts: 494
- Joined: Tue May 31, 2005 8:12 pm
- Location: Cleveland FL and Lakeport FL
Re: Gig Heads
I bought some of the no myth gig heads a few years ago, with some replacement tines. And they also had gig poles. Excellent product!
Re: Gig Heads
I have 4 of the four tines EZGIG on 4 different length poles. Will probably never need another, as these are really well made. Picked up 2 at Fastbreak in Okeechobee and 2 from Simple Heritage Outdoors in Bronson. I did hear that Nomytth (EZGig parent company) may be introducing a new gig pole, so I may not be done yet...
-
cowboy
- Site Supporter - VIII
- Posts: 6699
- Joined: Fri Dec 24, 2004 5:59 am
- Location: One One - Two Two Boogie Woogie Avenue
Re: Gig Heads
Hey...Bob1120 wrote:Cowboy those gigs head are really nice. I had broken my gig pole while frogging and lost the head. I started looking on the web for a new one and decided to make my own but just can't justify spending that much on a gig head. I'm to cheap I guess. Made one out of 1/2 conduit and number 7 mustads. They worked great made an extra. I'm going to try and attach a photo.
That's real nice. Good looking gig man.
Thanks for sharing that photo. Enjoyed getting a look at it.
-
newoldglory
- Site Supporter - VIII
- Posts: 1951
- Joined: Sat Dec 18, 2010 4:02 pm
- Location: WPB & 2a everglades
Re: Gig Heads
The first thing that I noticed is that you have to buy their tines for replacement. 
To open ones eyes, you must let them see!
Remember; sometimes it's better to be thought a fool than to open you're mouth and prove it.
Remember; sometimes it's better to be thought a fool than to open you're mouth and prove it.
Re: Gig Heads
newoldglory wrote:The first thing that I noticed is that you have to buy their tines for replacement.
It keeps you coming back.
Capitalism and smart marketing............. its a great thing.
Kind of hard to put a chevy intake on a ford ...... even if they are both small block engines.
14 x 8 Hamant
383 - 2.38 Stinger
80" 3 Blade
Stainless rigged
383 - 2.38 Stinger
80" 3 Blade
Stainless rigged