carburetor

[CGstamp]

I have a E85 continental 1949-50 engine that has a ps5c stromberg carb, does anybody have a clue to what i can replace it with or find a rebuilt for it. thanks

[GMAC 76]

are you sure it is an E85?.....C85 engine has a ma3 carb....never seen an E 85 all the e series engines were 165, 185 and 225...according to my papers the ps5c carb is on the E 185 ENGINE which is a 470 cont I do not know if parts or rebuild kits are even available for the old stromburg carbs....so any MA4-5 carb with a 10-???? for a 470 cont will be what ya need.... I have several rebuilt carbs for that engine if your interested in going with the 4-5 carb

[CGstamp]

sorry e185, so it will bolt on no problem and what is your asking price

[GMAC 76]

yes sir it will bolt right up and run your engine just fine, probably better than the old stromburg.....all my MA-4-5 carbs are completely rebuilt using FAA/PMA approved parts, bench tested and include new mounting gaskets and shipping $600....I have one left now it is a 10-3965-12 OEM on the 0-470 engine

[diamondback0320]

you will be very satisfied with (gmac 76)..good people & does the job right!

[Gary S]

Agreed with above.

[CGstamp]

who would be interested in the old carbs, i have two cores and what would shipping run for that?

[GMAC 76]

those carbs are not to my knowledge used much in the airboat world.....however they are popular sell items on e-bay for collectors and home builders and guys who restore old engines and planes .....shipping is included in the price on all my carbs ....... but if ya come pick it up I knock $15 off the selling price

[flcracker9]

you will be very satisfied with (gmac 76)..good people & does the job right!

What he said!!! I had my carb rebuilt by Greg (GMAC 76) and his work is top notch!!!

[rowdy1]

Greg did mine last month, It looks better than new and works great. Only took 5 days door to door.

[hdsadey]

Greg did some mags for my pops boat a year or so ago. He did a fantastic job and they are still running terrific. Turn around was less than a week.

[CGstamp]

GMAC 76 is there some place we can be more secure

[Deano]

This board has a built in PM (private message) attribute that works very similar to email.
Click on GMAC 76 in one of his posts and that will bring up his Profile.
Look at the bottom left and click on Private Message.

You can figure it out pretty easy from that point.
Be aware that it will look like is sitting in your OUTBOX folder, until he opens it.
At that point it will move to your SENT folder. This is how you know that he's received it.

Really easy to do, you just need to know where to look/start.

[GMAC 76]

GMAC 76 is there some place we can be more secure

you bet I will send ya a message

[CGstamp]

thanks Deano

[CGstamp]

GMAC 76 i forgot to ask, is it a pressurized carb or float?

[GMAC 76]

all MA-4-5 carbs are float carbs

[Billykid]

what is max fuel pressure for M4-5

[GMAC 76]

what is max fuel pressure for M4-5

3-5 psi