Reply To Ad - Southern Airboat

You are responding to Ad: 6 Continental Valve Covers with Intake Tubes & Tube Gaskets.

Recent Airboat Talk

Work led me to stumble upon a O-470-11B, thought about it for a bit and then went back and bought it. I know it runs as it was just on [...]

0470-11b continental looking for one forsale

Please let me know what u have 813-318-1962 thanks [...]

Balance issue

Wanted to get a little input and see what y’all think of this? This is an old 1988 panther 13 x 7 1/2 hull. I reconfigured the boat and put [...]

JX maximum pitch?

Has anyone found the max pitch the JX becomes inefficient? I have did a little engine work, props set at 29* on the sticker at 5100 and pushes like a [...]

airboat seat cushions and covers

Does anybody know who made these? Where can I get replacements? [...]

Airboat recovery companies

Does anyone know of a company that does what seatow or tow boat us does but for airboats? [...]

Cylinder 1 and 5 running hot

Got a fuel injected io 520 with individual cht probes (p-100) in each cylinder and gami injectors. I noticed cylinder 1 and 5 are running hot I think I hit [...]

saw a strange airboat today

Driving down the road in Inverness, FL. Airboat had a cab like an Alaskan airboat would use. It looked like a helicopter fuselage mounted on an airboat. It was very [...]

Buick 455 big block questions

Anybody on here know how to get a hold of whitebear? I was told he’s the one to talk to on dd Airboats with a 455 Buick. I just acquired [...]

Electronic ignition

I have a continental 520 I would like to find somebody near Ocala that could install electronic ignition. Thank you RL [...]

Reputable custom trailer manufacturers?

I currently have one quote from B&S and need one more. I did contact Airboat Stuff LLC but they are too swamped to work with me, unfortunately. The build will [...]

Question about Lycoming 540 fuel primer.

Im guesssing that most of you dont run fuel primers but am hopping you can help. I do all my running in the winter and have some cold start days [...]

. [...]

Another engine ID please

I think 0320 , prop bolts holes are 3/8, oil drain fittings are 45 degrees has a MA-4 carb on it , if 0320 how I determine horsepower? [...]

Airboat Hull/Rigging Post-Collision Assessment

Unfortunately, I'm dealing with the aftermath of a rear-end collision between an F-150 and my 2023 airboat hull/trailer. The other truck was running around 60 mph when it collided with [...]

hunt camp leases open to air boaters March 1st, 2025

Looking for members for hunt camp 3 private rooms with beds and A/C. Large camp with well equipped kitchen, Large common room, hot water shower, only accessible by airboat. In [...]

Prop Help

Hey guys, I have a 16x8 Diamondback with a CH3 counter rotator, 3:1 in the front, 2:1 in the back currently with a 3 blade power shift plus and 3 [...]

Latest Member Pics

IMG_9868.jpeg

St Johns north of 520 [...]

IMG_9178.jpeg

Headed to the lake [...]

IMG_4959.png

View this media item [...]

IMG_9349.jpeg

Stopped at the 346 bridge for a minute, water was too high to get under it. [...]

IMG_9353.jpeg

Cool pic of my ride [...]

IMG_8683.jpeg

Up at the Oakhead [...]

Great day on the St. Johns

...south of SR 46 [...]

Tate with a speck

I think he likes it! [...]

My Old Diamondback

18 year old runout 470 still running strong for my grandson. [...]

Wore out

View this media item [...]

IMG_8630.jpeg

Cool night time pic in Marion co [...]

IMG_8549.jpeg

Half moon lake, Ocklawaha FL [...]

Contact Seller