Search results

  1. G

    Pe 150, 220 gpu, 0 470 bendix mag parts?

    I Stock parts for Bendix magneto 20 series you can PM me.
  2. G

    Where to get 220 gpu push rod housing?

    I have them in stock
  3. G

    Second Mag For GPU

    Give me a call crewshap & bushhog520 here are images of bendix 20 series magneto with gear attached. phone 352-595-1943
  4. G

    Second Mag For GPU

    I have them 2 each in stock serviceable unit's they are the Harrison cooler that are on the gpu packette. They are tested and ready to go. PM me for pricing they are like gold now
  5. G

    Conintal starter

    That is a nippondenso starter you can get them from any auto parts store. They were used on alot of foreign car.
  6. G

    Lake near Ocala

    There is Orange lake its about 13000 acres & Lochlossa which is about 6000 acres. They are connected by Cross Creek so you can run both lakes. Its about 15 miles north of Ocala. You don't have to worry about curfew's they are not being enforced.
  7. G

    220 GPU Rings

    I have pistons in stock pm me for info
  8. G

    Need a carburetor for Continental 220 GPU

    I also have any parts you need for a gpu
  9. G

    Need a carburetor for Continental 220 GPU

    I have intake's in stock and also modified holley 4412 carb's I can set up for your gpu.
  10. G

    Continental 220 GPU

    Which gasket do you need from fuel pump to drive. Number # 6.
  11. G

    GPU cutdown oil pan/sump

    A stock gpu 220 sump weights 22 lbs. I have modified sumps in stock and they weight 10 lbs
  12. G

    Gpu220 losing power at full throttle

    It could be many things. I would check your magneto check to see If you have carbon tracking in your terminal block your mag could be shorting out. This is a common thing in aircraft engines that lose power at higher rpm. Had a lot of people bring there gpu's in to fix and they think its the...
  13. G

    Finding the right piston part number???

    part # 11487
  14. G

    220 rocker cover gaskets and exhaust gaskets

    If your going to clean it up and you want it to stay clean I would advise you to make sure that you have copper washers on your spark plugs. I see it all the time on bottom plug hole if cylinders are just taped without welding new material because most are heil-coil and there are not many...
  15. G

    520 runs rough after back fire. Lets take bets on what broke

    I my guess would be carbon tracking on your terminal block in one of your magneto's.
  16. G

    220/047 conversion

    it was in the late 80's early 90's P/N 648013 was replaced due to the piston skirt it was causing cylinder failures with leakage. Replacement P/N 648045 had the skirt contoured to reduce cylinder stress. 648013 was to be scrapped per FAA
  17. G

    220/047 conversion

    I can assure you P/N 648013 is for a O-520.
  18. G

    220/047 conversion

    Piston 648013 is for an O-520 engine,not O-470.
  19. G

    220 gpu part numbers complete list?

    PM me I have manuals for pe 150 and im local.
  20. G

    220 gpu pistons

    PM me i have factory new pistons in the box. And they are very reliable and you can rum pump gas i also have used piston different compression 3 and 4 ringed pistons in stock. Rick
Back
Top