And The Journey Begins

digginfool

Well-known member
Car Motor Barge ver. 2.5 starts tomorrow. It's finally time to put it back together. Going to be interesting!
94e0bf49be7f029adc02d3ce024678a6.jpg


Sent from my SM-G950U using Southern Airboat mobile app powered by Tapatalk
 
diggin - supporters wait with bated breath on your current excursion!! :stirpot: :salute:

bated breath: the condition of waiting for something to happen
excursion: deviation from a direct, definite, or proper course
:rebel:
 
Hummmm this could be interesting!

The great news is the Fool has two airboats so regardless of the dilemma he can keep the slide alive.
 
I would love to have a crane truck to help with the lifting, You shouldn't have any trouble getting it back together. Don't forget to count the tools.
 
So, first day on the water went well. Need more pitch for sure. Engine spins up real fast. Think the ECM is going to need more calibration. AFRs were a bit high, although the gauge was all over the place. I'll check the spark plugs and see how they look. If they look good, I'll re-calibrate the wide band and check again.
0f3e06ef44d6ef0f474385da5eb76caf.jpg


Sent from my SM-G950U using Southern Airboat mobile app powered by Tapatalk
 
Turns out the AFR was correct; plugs show a real lean condition. We didn't have the fuel pressure gauge at the shop last week when we did the test run. Going to throw it on and make sure the engine wasn't starving for fuel. If I have good pressure, the ECM goes back. Hope they can turn it around in time for Labor Day.
 
Back
Top