little more help

There are several guys here that can help.they have some realy nice carb adaptors,enabling you to run auotmotive carb.Most use a 500cfm holly 2 barrell,or smaller 4 barrell
 
I believe you have to run a 300 cfm 2 barrel. not a 500cfm. The 500 cfm's uaually get ran on a 6 cylinder. I've got a bad A$$ holley carb guy. He works at Redline Which is a race shop here in Davie Fl. I will guarrantee you he can put together a carb that will be RIGHT for the application. Pm me if you want me to hook you up with him. He is very reasonable price wise and will rework your carb if you have one. He has done 2 of my friends 500's for 6 cyl. ground powers and they never ran better.
 
Hey lane everybody don't run as good as yours! That setup of your is one of a kind. That thing has hurt a lot of feelings in 400 ft! I did talk to the holley guy I was referring to he said a 500cfm will work good on a 4 cylinder.
 
i ran a 380 cfm on a stock gpu, holley, worked real good when i converted the engine to 520 starved for air, i think speed wheelie still has that 380 holley it was new ran it about 3 months he also has intake adaptors usualy
 
You must log in or register to reply here.
Back
Top