• If you log in, the ads disappear in the forum and gallery. If you need help logging in or getting registered, send request to: webmaster@southernairboat.com

The new MiniMini Hull

Hey Bill, The MiniPro 105 hull sells for $ 1495.00. It is Hand Laid. Choice of Polygard colors.
We made a video this past Sunday of the MiniPro 105 running an I sent it to Papee. He will
try to post it on youtube or miniairboatassoc.com. I hope he gets it posted tonight.
The hulls can be ordered at Airboat Pro's LLC. 352-330-1015. Thanks, Chuck
 
I haven't seen the video posted here yet so here is the video.
http://www.youtube.com/watch?v=sLjw4v9DtMg
 
Very cool ..... the Kohler engine sounds quieter, too. It may be that CF prop, though.
Anyway, congratulations Chuck! Fun little boat.
 
This hull does resemble the baby Rivermaster. :D The original baby rivermaster is 12ft x 7 and can still be purchased at their new location. The baby Rivermaster and all of the others from 13ft to 15 ft are being produced at Ridge Runner Airboats in Lakeport Florida on Lake Okeechobee. Yes, the original Rivermaster is back and runs just as good as ever. :D Check them out at RidgeRunnerAirboats.com. pictures of hulls and parts and accessories. Give us a shout!

James cell# 863-228-1276
 
The MiniPro 105 is a dry running mini. Ronnie and David put the rigg back in the hull after work today. We had taken it apart to sand off the
sticky bottom and apply a coat of Frog Spit. Ronnie had the hull sitting on cardboard in the shop. He cranked it up and with 4 men on it, drove
it in the shop. They took it to the pasture where it drove around with 4 men without wiggling the rudders. Then Ronnie and David drove it up
a hill. Ronnie's wife made a video and I will get to see it in the mornning. If I can download from her cam, I will try to upload it. This weekend
we might try it on the asphalt on State Rd 44. Got to see it's limits. :) Chuck
 
You must log in or register to reply here.
Back
Top