What type of Hull, Prop & Power plant you run poll

[nomad41]

14'Freedom Craft,Plumbers 383 stroker(bad to the bone),2.38 stinger with 79" 3 bladed R,Oh yea satellite radio,Piratecom headsets,Color chart plotter,Fuel flow meter,I Pod

 

[HuntingBigun]

Big Thanks for all that have posted, the numbers for engines are about what i figured but the hulls I lost that bet. Come on Kissimee faithful I know bunch of the glass boys must not have voted yet.

 

[elviswho]

14 ft Alumatech,GSO-480, 3blade Sensenich R-series,

 

[plumcrazy]

thunders theory about the demise of a/c boats is in the toilet 8)

 

[goldhunter_2]

Big Thanks for all that have posted, the numbers for engines are about what i figured but the hulls I lost that bet. Come on Kissimee faithful I know bunch of the glass boys must not have voted yet.

The aircraft over car motors and the aluminum hulls over fiberglass hulls didn't really surprise me but the prop numbers did :? I expected more four blades and expected to see at least double anything else in the number of two blade props

 

[grant]

I guess the wood prop guys don't do the internet :shock: Sure seems about 50% of the boats i see have wood!

 

[plumcrazy]

dang sure alot of wood in south fl for sure and thats wierd considering yall have very few trees :mrgreen:

 

[Deano]

Well Plum,

Maybe all those wood props ya see down there are why there ain't that my trees. :lol: :lol:

Deano

 

[gatorgetter]

fiberglass 14'x7'6" 500 caddie 74x44 woodie

 

[dynaairglide]

14'3" Fiberglass slider, PE-150 Continental, 3-Blade Sensenich 'H'

 

[SilverSurfer]

aluminum hull 520 aircraft powershift 72 composite prop

 

[Monkeydust]

alum,ac,composite

 

[SWAMPCRACKER85]

Don't have a boat, but i want a fiberglass,carmotor,and 2-3 blade whisper tip prop...I use to have a 12X7 3/4 deck taylor hull. setup for a 350 but never got it on the water...Just did'nt have the money to put boat together and still dont have enough for a boat :evil: i guess if i wish harder i'll have one sooner or later... :bounce:

 

[Champ18ft]

SWAMPCRACKER85, How the H#ll did your Posts get to Posts: 16777215 ?
Keep a wishin and maybe someday. Remember Santa knows when your naughty or nice. :lol: :lol: :lol: :lol: :lol:

 

[HuntingBigun]

Looks like the numbers are staying the same 104 A/C 75 C/M almost the same for the hulls 103 metal 74 fiberglass, 180 boats responded so far, Thanks again

 

[poobought]

383 with a three blade super wide and a 14.5 Glass hull.

 

[Fat Cat]

As of tonite the proud owner of a 12x7 Hamant 220gpu with a 2 blade power shift. Havnt even got a chance to get it wet but it will push my Tacoma 30mph down the road no problem ............ 8)

 

[reelemin]

fiberglass, caddy 500, 2 blade waterwalker

 

[griggspsycolyco540]

14 SEMINOLE (LASER) ANGLE VALVE 0-540 (JURNIGAN) TRHEE BLADE WHIRLWIND SIMPLY NASTY

 

[McFishin]

15' aluminum Whooley hull (forward cab/windshield for cold Utah winters)
Lycoming 0290 with wood banks-maxwell prop.
Everything about this boat is old , but it runs like a top!